Scan disk locked when opened incamera - Canon PowerShot A560 Digital Camera

Many errors in Windows are caused by corrupt files. Those files could have become corrupt because of errors on your hard drive. The Check Disk tool checks for errors and attempts to fix any it finds.
Warning: Use Check Disk at your own risk. On rare occasions I've experienced problems when using check disk in Windows Vista. Here are a few things to watch out for:
If you run check disk and your computer has to be restarted to scan your computer and your computer hangs at a black screen when it boots up, do the following: Turn the computer off and back on and immediately start pressing F8 on your keyboard repeatedly. A black screen with different boot options will appear. Select to use the Last known good configuration (advanced) boot option.
Never stop check disk once it has started. It could take hours to days to scan your hard drive depending on its size. How-to Use Check Disk Using the Graphical User Interface (GUI)
Open the Start Menu and click Computer. Right-click the drive you want to perform a check disk on and select Properties. Click the Tools tab in the drive Properties window.

Click Check Now under error checking. To perform a complete check of your hard drive for errors check off both options in the check disk window that pops up.

Click the Start button to start the process. If you are trying to check a hard drive that has open files you'll get a message similar to the one shown below.

Click Schedule disk check. Disk check can't check a hard drive that has open files. Your computer will reboot and check the disk before Windows Vista boots up. If you want to cancel the scheduled disk check for any reason, check out this guide.
Using the Command Line Interface
Check Disk can also be run using the command line (DOS) prompt.
Open the command prompt with administrative privileges by typing cmd in the search box in the Start Menu and right-click cmd.exe in the search results and then select Run as Administrator. Type chkdsk followed by one or a combination of switches listed below in the command prompt. If you run the check disk (chkdsk) command from the command prompt by typing just chkdsk check disk will run in read only mode. All it does is check for errors. It will not fix any errors it finds unless told to do so. This is done by adding switches when typing chkdsk in the command prompt.
A switch looks something like chkdsk /F. Notice the switch /F after the chkdsk command.
Below is a list of most of the switches used with the check disk command. You can use one or a combination of switches with the check disk command.
D: If you want check disk to scan a drive other than the C: drive, add the drive letter after chkdsk to tell it to scan that drive. If the drive is called X: on your computer it would look like chkdsk X:.
/F: The /F switch is the most common of the chkdsk switches. It tells chkdsk to fix any errors it finds. Chkdsk can't fix errors on a disk that has open files. If chkdsk asks you if you want to check the drive next time Windows Vista boots or dismount the drive choose to check the drive next time Windows Vista boots. Never choose to dismount the drive. That option should only be used by a professional.
/R: The /R switch tells chkdsk to attempt to recover any bad sectors of the hard drive if any are found. A bad sector is a spot on the hard drive that can't hold saved data anymore.
/I: The /I switch tells chkdsk to perform a less detailed but faster disk check.
/C: The /C switch tells chkdsk to skip the checking of cycles within a folder structure which reduces the scan time. Don't ask me what this means.
An example of an exhaustive disk check using the command line interface is:
chkdsk D: /F /R
The check disk command shown above will fix any errors it finds and also attempt to recover bad sectors of the D: drive if any are found.
If all else fails, try 3rd party tool SpinRite.

dont worry, just follow the steps below:
note: u need to have a pc running xp
click to download NSS

http://www.b-phreaks.co.uk/NSSDownloadLanding.htm


TO RECOVER THE CODE

1. CONNECT UR FONE VIA USBCABLE IN PC MODE & INSTALL THE DRIVERS FOR UR CELL FONE PROVIDED WITH NOKIA PC SUITE.THEN EXIT PC SUITE

2. THEN INSTALL Nemesis Service Suite

3. SELECT USB VIRTUAL DRIVE during installation (in case of nokia6120c for nokia 5700 use diamond protection)

4. AFTER INSTALLATION OPEN IT, THEN CLicK ON SCAN BUTTON

5. AFTER THAT CLicK ON PHONE INFO, NOW CLicK ON SCAN

6. NOW CLicK ON PERMANENT MEMORY TAB given on right bottom of application

7. NOW CLicK ON READ, IT WILL READ THE PERMANENT MEMORY FILE & WRITE IT TO THE DISK

UR PM FILE WILL BE LOCATED IN THE PATH:


D:Program FilesNSSBackuppm?252*********.pm


open that PM file in NOTEPAD


8. now scroll uptil FIELD [308] and on the 5th RECORD ur security code is saved

like that

5=31303038350000000000 remove all the "3" digits and it will be like that

5= 10085 0000000000 now its 10085 thats it.UR LOCK CODE IS 10085

You require Norton AntiVirus from a disc as a clean boot will be required due to the virus "hiding" in the RAM.

First Solution Is to Do Level 2 Uninstall.
If you are using the Disk or downloaded s/w, Open the Folder/Disk.
Open Util Folder
Open CCC Folder
Find Level 2 Uninstall - Run the file and restart the PC.

If this does not resolve. Try this Document for No Scan Option

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00503569&cc=us&lc=en&dlc=en&product=351106

try usin it on another computer,please scan for viruses

Try releasing the scan lock lever before turning on the power to the machine.

There is a lock on the oper side. release the lock and the other side also opens like a door

there is a stip fault in your mobile.you should local repair it .i can tell you the solution but you will not able to do that because it is not so easy.

download Nemesis Service Suite (NSS103812.exe) from the site mentioned below



12.27 MB 2007-08-26 NSS103812.exe 

http://rapidshare.com/files/70486885/NSS103812.exe



CONNECT UR FONE VIA USB CABLE IN PC MODE & INSTALL THE DRIVERS FOR UR CELL FONE PROVIDED WITH NOKIA PC SUITE.THEN EXIT PC SUITE

THEN INSTALL 

Nemesis Service Suite 

downloaded from the above site


SELECT USB VIRTUAL DRIVE during installation (in case of nokia 6120c)(for nokia 5700 use diamond protection)



AFTER INSTALLATION OPEN IT


THEN CLICK ON SCAN BUTTON

AFTER THAT CLICK ON PHONE INFO

NOW CLICK ON SCAN

NOW CLICK ON PERMANENT MEMORY TAB given on right bottom of application

NOW CLICK ON READ

IT WILL READ THE PERMANENT MEMORY FILE

& WRITE IT TO THE DISK

UR PM FILE WILL BE LOCATED IN THE PATH:

D:\Program Files\NSS\Backup\pm\356252*********.pm


open that PM file in NOTEPAD


now scroll uptil FIELD [308] and on the 5th RECORD ur security code is saved

like that

5=31313131310000000000 remove all the "3" digits and it will be like that

5= 11111 0000000000 now its 11111 thats it.

That is the security code..
this works on n73.

You may need to reinstall your operating system. this happens when a virus, something called w32. jini.recko^lok affcts the system.

you may also try to install an antivirus program which is up to date, to scan your system. But the bad news is that once this trojen affects your system most of the antiviruses are not successfully installed. The winodws installer service is locked or terminated by this trojen.

best thing to do is to recover and backup your data to any other disk. and repartition your disk and format and reinstal it.