I dont know how to set the clock - Pioneer DEH-P6900UB CD Player

usually you push clock, put in time, push clock, click am/pm to whichever it is, then push clock again. That should set it.

Here is a link to the owner's manual for the stereo, it will tell you how to set the clock:
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/130/130DEHP500.PDF

I have a skyscan Atomic clock model no 86730 and can't set it, every time i get it set, it goes back 1 hr, i need to know to set it to daylight savings time

Press and hold SEL until menu appears
Using the scan button (FWD/REV), select Clock H
Using the volume knob, set the value
Using the scan button (FWD/REV), select Clock M
Using the volume knob, set the value
Press SEL to save and exit

1 - Press FUNCTION to select clock (Press FUNCTION repeatedly until clock appears in the display)

2 - Press < or > to select the segment of the clock display you wish to set. (Pressing < or > will select one segment of the clock display: Hour -- Minute)

3 - Press /\ or \/ to set the clock. (Pressing /\ will increase the selected hour or minute. Pressing \/ will decrease the selected hour or minute.

Hope that helps!

Turn radio off then press and hold your knob in until you see a menu turn knob until you see the clock menu then set by moving knob up or down to change numbers and right or left to change hours, minutes or seconds. I hope this helps.

There are two depressions just under the clock, pressing one with a ballpoint pen changes the hours, the other changes the minutes

Solution #1 posted on Apr 03, 2008

Rondart
Rank: Apprentice
Rating: 0%, 0 votes
On the back of the clock - left hand side if you've laid it down on it's face - is a row of switches. You need to start the time set-up with the clock having been unplugged so there's no time set in the memory.
Now, to those switches: The first (from the left) is DST = Daylight Savings Time - right now you'de set this to "ON."
The second switch is Time Zone: PST, MST, CST, EST (Pacific, Mountain, Central, Eastern). Set the switch to the time zone you are in.
The third is just the brightness.

Now, to set the time itself:
1 - Turn the clock face back up to where you can see it.
2 - LOOK AT THE CLOCK - LOL! This is an atomically set clock - you shouldn't need to set the time. The atomic clock bounces off of satellites all around the world. There is literally little to no "dead zones" for the clock, so you should never have to set your clock - just set it up like I state at the beginning.

Good Luck!

For the JVC KD-G200 look here for instructions on how to set the clock...

http://www.fixya.com/support/p187738-jvc_kd_g200_cd_player/manual-17158/page-9

u can find how to set the time on this link good luck


http://www.pioneerelectronics.ca/pio/pe/vgn/images/portal/cit_11221/49545CRD3133A_200012301341830.pdf