I have the gpx c208b digital clock radio. I recently set an alarm on it and it has been repeating everytime the time is near. i want to know how can i get it to turn off unless i personally set it myself. it is getting annoying right now. thanks

Amazon com Customer Reviews GPX D606 AM FM Clock Radio with dual Alarm and... GPX D606 Dual Alarm Sensor Touch AM FM Digital Alarm Clock Radio

PDF]Instruction Booklet - Sound Therapy and Relaxation Clock ...

www.conair.com/instruction.../07ps111_su7_ib.pdf

Conair CorporationThe LCD display will show the current time of ALARM 1, reset time. ... The Conair Sound Therapy & Relaxation Clock Radio System can be used with a cord ... 1) 10 high quality digital recordings .... 150 Milford Road, East Windsor, NJ 08520.

Muse - Alarm clock radio

www.muse-europe.com/en/products/alarm-clock-radio

Catalogue Products, Cat?gorie Alarm clock radio. ... M-125 CRB. Clock radio CD player with MP3 ... M-150 CR. Clock radio ... Automatic time-set clock radio PLL ...

[PDF]FM/AM Clock Radio - Sony

this may help http://www.ehow.com/how_7334319_instructions-gpx-clock-radio.html
Maybe ask gpx see http://www.gpx.com/store/pg/78-GPX-Support.aspx

To set the clock:
1. With the power off, press the TIME button; the time will blink.

2. Press the MINUTE button to set the present minute and the HOUR button to set the present hour.
Make sure to set the correct AM/PM setting.

3 Press the TIME button (or wait approx. 15 seconds) and the time will be set.

To set or reset alarm time:
1. With the power off, press the desired ALARM, Press and hold the desired ALARM 1 or ALARM 2 button; the alarm time will blink. The Alarm 1 or Alarm 2 time and settings will appear.
Press the MINUTE button to set the alarm.

2. Press and hold the desired ALARM 1 or ALARM 2button; the alarm time will blink.
Press the MINUTE button to set the alarm minute and the HOUR button to set the alarm hour. Make sure
to set AM/PM setting. Press the ALARM 1 or ALARM 2button again (or wait approx. 15 seconds).

3. Repeatedly press the ALARM 1 or ALARM 2 button to select alarm off, alarm on, for buzzer, radio or CD.

If you needed the manual it could be downloaded:
http://www.retrevo.com/support/Memorex-MC7101-Clock-Radios-manual/id/1081dj880/t/2/

Thanks.
gylacz

If you click the "alarm" button repeatedly you can pick what you want to wake up to. Do this until the only little picture lit up is the alarm clock picture. That will turn of the alarm.

The manual:

http://www.retrevo.com/support/GPX-HM3817DT-manual/id/1183ag710/t/2/

Page 6>>>>

Setting the Clock
a. Press the STANDBY button until the unit is in standby mode.
• When the unit is in standby mode, the STANDBY button will be red.
b. Press the CLK ADJ. button. The time will begin to blink.
c. Press the HOUR and MINUTE buttons to adjust the hour and minute.
d. Press the CLK ADJ. button to set the adjusted time.
Setting the Alarm
a. Press the STANDBY button until the unit is in standby mode.
• When the unit is in standby mode, the STANDBY button will be red.
b. Press the ALARM SET button. The time will begin to blink.
c. Press the FUNCTION button to seleect CD, Radio, AUX, or Buzzer.
• For Buzzer mode, the display will not show any indication.
d. Press the HOUR and MINUTE buttons to adjust the hour and minute.
e. Press the ALARM SET button to set the adjusted alarm time.
• An alarm clock icon will appear on the LCD Display when the alarm is set.

Here is the PDF of instructions. http://www.tinxi.com/download/88028_en.pdf

Hi,

According to the instructions that we received with our clock. You should be able to get the Instruction manual from [email protected]. It is also supposed to be under the support section of the website www.dpi-global.com but I couldn't find such a link.

However the "Operational Support" insert has the following:

Setting the clock
1. With the unit powered off, press and hold the "Clock/Display/Play/Pause Button" for at least 4 seconds.
2. While holding the "Clock/Display/Play/Pause Button", press the "Hour" and "Minute Buttons" to adjust the hour and minute on the time.
3. When the correct time is selected, release the "Clock/Display/Play/Pause Button" to set the clock

Setting the Alarms
1. With the unit powered off, press and hold the "AL1" or "AL2" Button for at least 4 seconds.
NOTE: An alarm icon will begin to flash on the LCD display.

2. While holding the "AL1" or "AL2" Button, press the "Hour" and "Minute Buttons" to adjust the hour and minute on the alarm time.

3. When the correct time is selected, release the "AL1" or "AL2" Button to set the clock.

4. Press the "AL1" or "AL2" Button consecutively to switch alarm one and alarm two between sounding to a buzzer, the currently set radio station, or a docked iPod.

use the selector switch on the top, switch it to wake 1 or wake 2. set the time that you want that alarm to go off. then push the switch all the way back to the left to deactivate it. then to activate the alarm, use the buttons on top labeled wake 1 or wake 2 to turn the desired alarm on. pushing that button repeatedly will cycle the alarm to either beep, radio, or it will turn that alarm off.

This clock has 2 alarms to set Alarm 1, switch alarm 1 to the "set" position and make sure alarm 2 is pushed to the "off" "radio" or "cathedral" position, press and hold the "alarm" button on top while pressing the "f.fwd" or "rev" button to set the alarm....to set Alarm 2, do the opposite of the set buttons and repeat...to set the time just hold the time button down while pressing "f.fwd" or "rev"...hope that wasn't too confusing.