I got a F2 error code on the display. The top heating element in the oven will not turn off. I turned off the oven at the main house panel.

Runaway temperature over 590'F!

How to Fix GE Oven Error Code F2

D3 Appliance https://d3appliance.com > News and Tips
Dec 6, 2021 - A GE oven error code F2 occurs when the oven temperature is too high. Follow our comprehensive guide to diagnose and fix the issue.

My General Electric Oven Is Displaying The F2 Error ??

Express Appliance Repair Winnipeg https://www.expressrepairwinnipeg.ca > general-electri...
If any wires are exposed or damaged then your temperature sensor is misreading your oven's heat which causes the F2 error code. If you have found any damaged or ...
"); background-repeat: repeat-x; display: inline-block; overflow: hidden; position: relative; background-size: 14px 11.4px; height: 11.4px; width: 68px;">"); background-repeat: repeat-x; display: block; background-size: 14px 11.4px; height: 11.4px; width: 62px;"> Rating: 4.5 · ‎950 reviews
Missing: 326B1230P001 ‎' Show results with: 326B1230P001

How to Fix a GE Oven Showing Error F2

Hunker https://www.hunker.com > ... > Interior Home Repair
If you have a GE oven, the error code F2 on the oven means that the temperature sensor has detected a temperature in excess of the preset threshold.

Question edited for clarity, funky punctuation, and spelling of maker.

E8 is just a generic 'the oven isn't working code'. The most obvious thing is a failed element. Check it with a digital multimeter.

Samsung Oven Error Codes - I-FIX Appliance Repair

I-Fix Appliance Repair https://ifixappliances.ca > samsung-oven-error-codes
Error Code, Problem, Solution ; E08, The oven is not heating, Unplug the oven to check the elements inside. The problem may be in one or most of the heating ...
Error Code: Problem
E-55: Communication error with touch panel
E-OA: Oven overheating
E-OE: Oven door lock error

Samsung oven error code e08

JustAnswer https://www.justanswer.com > Appliance Repair
Jun 27, 2012 - E08 just means that there is a heating issue with your oven. It's not really specific as to which can cause the problem since there are many ...
1 answer · Top answer: yes of course. Just let me know. But what you're looking at is either a bad element (if just ...

Samsung range or wall oven error codes

Samsung https://www.samsung.com > support > TSG01001948
Since the cooktop cannot be in use when running Self Clean, this error is alerting that one or more of the cooktop burners or elements are in use. Turn all ...
Missing: e8 ‎' Must include: e8

..

Oven keeps beeping:
As there is no reprogramming of most control boards try this, disconnect the power and wait 30 seconds and then reconnecting the power.

If it's an "F1" fault code this generally implies an electronic oven control (EOC) failure. Disconnect the power, wait 30 seconds or longer and then reapply power. If "F1" returns upon power-up, replace the electronic oven control.
The oven control can be accessed and replaced from the rear of the control panel.

NOTE:Disconnect the power cord from the power source before removing the panel from behind the console.
If its an F2 ERROR CODE, The F2 error indicates an open circuit in the oven temperature probe.

Your range has a resettable thermostat in series with the oven temperature probe. If this thermostat opens the clock will display F2 and the oven won't heat.
You can reset the thermostat by pushing in the reset button on top of the thermostat.
Some ovens have an alarm that will beep continuously every six seconds to alert you that the oven is still on. Usually, a kitchen timer that you have set will cause the beeping, but occasionally it can be an error with the oven's settings. If it is the kitchen timer, you can simply push the "Kitchen Timer On/Off" button to end the continuous beeping. If that does not stop the beeping, it is probably beeping due to an error. You can turn the continuous beeping off but you may still need to troubleshoot the issue that is causing the beeping noise.

Read more :

http://www.ehow.com/how_12086370_ge-oven-stop-beeping.html

Start here

You will need to replace the control panel.
Here is the part to order.

Looking up your fault code and this is what I found :

replace oven control (also called clock or ERC). It's the temp control unit for the oven, this could explain your lack of heat.


If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

Sounds to me from the information you provided that the auto timer is set...when the auto timer gets set you are generally unable to use the oven. If the auto timer is not set then you are looking at a problem with the Electronic oven control..do any error codes show up f1 - f2 - f3 and so on?

its your temp sensor. replace it and it should fix ur prob
F2=overheat
is your bottom element connected?

the sensor in your oven is picking up the high heat and posting error message which displays F2 ,at least the sensor is working but lets look at the problem isuspect one of two the first is your control switch needs tested i would say this is the problem and number two the elemant could be on its way out either of these problems are going to need a electrican to fix ,sorry i cant give you a simple answer to your problem.adrian

f2 f3 code showing