Wireing diagram for Jensen a800 amp - Jensen Car Audio & Video

Library is the best place ever, take a pocket full of change and you can make copies of the pages you need from Chilton's Ref Books

Yeah, "wireing" can be hard to understand. Recommend contacting a local car audio professional or Pyramid customer support directly here:

http://www.pyramidcaraudio.com/ContactUs.aspx

Hi, what you want to do is just connect the speaker wires from the head unit straight across to the pre-amp inputs of the amp. If you have a sub, also connect the pre-amp outputs of the head unit to the 2 sub inputs of the amp. Connect the blue wire of the head unit to the turn-on terminal of the amp and connect power wires to both units. May I ask what speakers are you using?

Check this site http://shop.siriusxm.com/edealinv/servlet/ExecMacro?nurl=control/CategorySupport.vm&ctl_nbr=10600&catParentID=58741

This amp can be installed just like most any other car audio amp. A great tutorial can be found here:

http://www.caraudiohelp.com/how_to_install_a_car_amp/how_to_install_a_car_amp.htm

you shouldn't need a diagram all you need is these items here.

purchase a 4gauge wiring kit

run a a power line from battery to amp with a in line fuse 6in from battery.

run a ground from car frame to amp. ( scratch paint and screw it down with an eyelet for good contact)

run a remote from radio to amp.(blue wire)

run rca's from the radio to the amp ( sub input on back of radio)

finally connect your speakers.

If you really are wanting the best one, go down to your HD dealer and order the service manual & the electrical manual for your bike.

jensen contacted me back with a wireing harness . thank you

HAVE YOU TRIED A GOOGLE SEARCH FOR THIS DIAGRAM

xa 1120 amp pin out 123
456



1 left neg
2 ground to radio
3 left positive
4 right neg
5 blank-not used
6 right positive