Cannot connect to computer via lead. will not enable via usb port. has worked perfectly up to now. unable to sync files to archos because of this. help.

You can download shareit for your PC and transfer files from your mobile to PC via WiFi.
Shareit file for PC https://en.softonic.com/download/shareit/android

To help you connect your ipad to the computer, please follow the step-by-step instructions given below:
- Turn both the computer and iPad ON before connecting.
- Plug the iPad's docking port into the appropriate end of the dock connector-to-USB cable.
- Plug the USB end of the iPad's dock connector-to-USB cable into an open USB port on your desktop. If iTunes doesn't open automatically, open the program to sync files and apps between the devices.
- Do not disconnect while the iPad is syncing or the sync won't complete.
- Remove either end of the cable to disconnect your iPad from the PC.
- After the first connection, you may choose to connect the two via Wi-Fi so you don't need to use the cable.
- Using iTunes, you can sync your audio, video, photos, apps and documents. This lets you transfer important files and apps you use for your business between your iPad and computer.

GuruAid.com

You should keep your eye on the device after its been plugged to the PC it will give you 2 options "charge" or "usb" you ca not establish a connection without picking usb connection option on the Archos screen when it pops up. If you are doing so and problem still existed then i would recommend you to download the latest windows media player. Because it comes with new devices sync driver update.

Depending on which settings you have on the archos 5 or 7 itself, (you can select "Windows Media Player mode" or " Hard drive/PC/Mass Storage mode" when you choose enable USB a new letter will appear as shown below (if you are on XP - same goes for Vista):


Hope this helps?

if the computer wont pick up the device then you need to plug it into a high speed usb port usually located in the back of your computer

No, it's very likely a software configuration option on your phone.

Goto: "Start | Settings | Connections | USB to PC" and clear the checkbox "Enable faster data synchronization". Don't forget to restart your phone afterwards.

Having that option "enabled" makes for faster (Explorer-like) file-transfers, but disables "ActiveSync", making the device a normal "USB storage device" without the sync extra features. Disabling the options re-enables the "ActiveSync".

Hi there again,
I am assuming you are using XP OS.....
I have a couple of questions for you.

Try this.............
With computer on and camera NOT connected,
Please look at my computer,


1.What happens when you connect camera to usb lead then connect the lead to the computers usb port?

2,Would it upset you if we use another way of moving your photo and video files from camera to computer?

3.Does Memory card work in another device or computer?

Solution 1 =================================
If usb did not recongise the camera on the usb port then it will be a software and hardware reinstall ,
Remove usb lead from computer
Go to Add/Remove from you control panel.
Remove the cameras software.reboot.
restart install software first and reboot,
do not connect camera yet,WAIT.
once restarted add camera via usb
should be good to go.....

If it does continue to give you issues then consult the manufactuerer.


Solution 2 =================================
if the usb is connected to the camera via usb lead to usb port on the computer and you can see the cameras' drive info then its more than likely you will be able to open and use this file ,if so you should be able the move these files to your computer too.

Solution 3 =====================================
Explains itself really-Replace it if you need to.

Hope this sorts out your problem.
I beleive your card reader may be poked,
Uninstall and reinstall try again, replace if presists.

these solutions I have put forward have been proven to work in many situations so good luck and let us know the results thanks

Usually rebooting the phone will cure this, I presume you have switched the phone off, removed the battery and restarted?

make sure in
File--> connection settings
that usb and the port you have assigned to bluetooth is enabled
(all tick boxes checked)

try deleting the device from active sync
File--> Mobile device --> (select your device)
then go to
File --> Delete mobile device
make sure you have copies of any un-synced data as it may be lost but shouldn't.

If I remember rightly (dont have a touch to hand) also delete the link to the pc in the active sync window on the touch
Menu--> options (select the server name) Menu-->Delete

and re create the profile by plugging in the device.

If change the setting of the 605 to "hard disk" then a PC sees the 605 as a hard disc when connected using the usb lead. You can then copy and paste files directly to the 605..

Did you tried installing the ActivSync again, for Windows XP the version is 4.5, for Windows Vista is 6.0, Try installing the AS