How do I to make a password for the D-Link 802.11g Wireless Router WBR-1310 (WBR1310) ?

ON THE BACK OF THE ROUTER IS A SMALL HOLE AND WITH THE R ON PRESS IT FOR 10 SECS.AFTER THAT GO TO THE S-UP PAGE.

reset the router to factory default. if you are confident. it is a small button at the back. press it coupel of sec then release. Then you can reset the password.

Go to D-Link - TechSupport FAQ and get the driver.

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Press the reset hole on the back of the router in with a pen for at least 30 seconds. This will reset your router to factory settings

Try 4 combinations:
* blank ID, and blank password,
* blank ID, and password of 'admin',
* ID of 'admin', and blank password,
* ID of 'admin', and password of 'admin'.

Failing all the above, do a "hardware-reset" on the router, and try the above 4 again -- one of the 4 will work.

For the D-Link WR-1310, the following are the default login credentials:
username: admin
password: (none). Just leave it blank.

Go the router setup page, 192.168.0.1, type admin as the user name and password as the password (default, if you have changed these use your login info).
Then on the wireless page change the SSID (router name).
You can also add a security key on this page.

http://support.dlink.com/emulators/wbr1310_revA/wireless.htm

more info from D-Link:

http://www.dlink.com/products/support.asp?pid=474&pv=96&sec=1

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

http://www.broadbandreports.com/forum/r19086676-DLink-WBR1310-Forgot-UserPass

If you have tried the default password and it doesn't work, I think your only alternative will be to reset the router to the factory defaults

Hi there,

As an initial info try to do a hard reset on the unit, this process will restore the system into a original settings. you can find the reset switch on either on the left of right sight of your router.

or

you may visit this SITE to recover again your current password without erasing or removing the current settings made.

Reset Password.

Hope this idea helps you.

Thank you for using fixya.

The username is admin
There is no password