Door handle broke off my microwave mmv4205baw

Maytag mvp v microwave door handle parts Questions ...

www.fixya.com > Forum > Tags > mvp v microwave door handle parts

Maytag mvp v microwave door handle parts related problems. Ask your Maytag mvp v... The handle on my maytag microwave oven broke off ... door handle ...

Maytag Microwave Handle Parts from RepairClinic.com

www.repairclinic.com/Shop-For-Parts/.../Maytag-Microwave-Handle-Par...

Shop for your Maytag Microwave Handle from our huge inventory. Return any part for any ... Repair Help for Microwaves .... Microwave Oven Door Handle.

CMV1000ADW Maytag Microwave Parts and Repair Help

www.partselect.com/Models/CMV1000ADW/

can u send me the pic of door and the handle of ur oven at [email protected]........

One of the micro switches has malfunctioned, and must be replaced for normal operation.

Actually the door handle CAN be replaced at a cost much less than pruchasing an entire new microwave oven. And, YOU can repair this yourself and save the cost of a service call. On MOST microwave ovens, you just have to remove the inner door panel that goes around the perimeter of the glass. The following link explains how to replace the door handle:

http://www.fixya.com/support/r3696942-microwave_oven_door_handle_replacement

If the model number is correct, the part number is WB15X322. The cost is about $40. Replacements may be purchased at the websites listed in the link I provided.

If you have any questions, or if your model number is different than the one listed, please post back and let me know. I hope this helps you

appliancepartspros.com. part number AP3187809 $56.40 plus shipping

remove door handle

Yes it can.

Of course it is.  You can glue it on with gorilla glue, perhaps using a screw shaft (be sure to drill pilot holes) like a dowel in carpentry to secure and add area for the glue to adhere to.  Drill the pilot hole in the handle bit the thread diameter rather than the shaft diameter, so you don't have to screw the handle on once you cut off the screw head.

I think you have solved your problem already.

I have seen your requesty only now and I am sending the diagram to replace handle.

You remove door latch (nr 3 on diagram) first, then you unscrew the screw nr .8 and remove handle (nr.7).

Below the diagram:



You can find all parts and diagram for your appliance here.

Check out this door frame diagram, specifically number 1805. It clips on to the door frame. Remove it using a dull table knife or something similar (be careful not to scratch or break anything). You will then have access to the bottom screw.