I just purchased the special forces headset and i'm unable to connect to my PS3 network. The system says it's searching for device. Thanks, J

You should call Mad Catz, their number is 1.800.659.2287

First, examine the connection receptables on the PS 3. For example, inserting the head set pin into wrong PS 3 connection receptable would not produce any sound discussable.
1. The PS3 device has several connection receptacles either for video audio output or video audio in put.
2. Video audio out put only gets sound and movies out of the PS3 device to be projected on to another device, e.g. projector, TV screen or Any out put devices.

Note: You solution is to connect the headset to the out put indication area keeping in mind not to connect to the Video receptable, else would be trying to output video signals to the headset.

Caution: You do not want to connect the headset pin to the Video Audio Input receptacle areas, because, you would be trying to send signals into the PS3 device rather than get sound out.

Important Notes;
Getting signals out of a device like PS3 is inserting the headset in this case, pin connector would be inserted in the INPUT Area; keep in mind your are tryinng to hear sound, SO connect the HeadSet PIN to AUDIO reception area on the PS3 device

The same techniques is achievable for all equipment requirign connection.
REMEMBER TO PHYSOCALLY LOCATE THE INPUT to OUTOUT area on the device.

Give the following proccess a try.

contact the manual of the PS3 device refering to the device connectivity chapters or
Systems diagnostic or malfunction chapters for technical material when required.

Pairing the Headset with a Sony Playstation3 Entertainment System:

To pair your [EM-227] Bluetooth Headset with the Sony Playstation3 (PS3), go to the PS3 main menu, scroll to "Settings" and select.

Scroll to "Accessory Settings" and select.

Scroll to "Manage Bluetooth Devices" and select.

The menu will ask: "The Bluetooth device has not been registered. Do you want to register it?"

Select YES.

Put your [EM-227] Bluetooth Headset into discover mode (see X.XX of this manual for instructions on how to get the headset into discover mode).

Select "Start Scanning" from the PS3 menu.

Once the PS3 has discovered the [EM-227] Headset the screen will read "Select the Bluetooth device to register".

Select [EM-227].

The PS3 will ask for a passkey. Enter [0000] then press "OK".

Now press O (the PS3 circle button) to get back to the previous menu.

Scroll to "Audio Device Settings".

Change the "Input Device" to [EM-227].

Note: "Input Device" is the microphone, how others will hear you speak.

By default, the "Output Device" will now switch to [EM-227].

Note: "Output Device" is the audio, how you will hear the PS3 audio and others speaking.

If you would like to hear the PS3 audio and others speaking through your TV or Audio System, scroll to "Output Device" and switch to "System Default Device". If you would like to hear sound through the [EM-227] headset, then leave the "Output Device" setting on [EM-227].

To test your connection, speak into the headset and you will see the bars above the "Microphone Level" moving. If not, repeat the pairing process.

Press "OK" to confirm the new settings. You are now ready to use the [EM-227] Bluetooth Headset with your PS3 Entertainment System.

For further assistance with Bluetooth settings on your PS3 please refer to your PS3 instruction manual.

You must put your headset in pairing mode, prior to making your PS3 search for new devices. To do it, start with your headset turned off. Then, press and hold the MFB (Multi-Function Buttons) for some 8 seconds, until the indicator light is steadily lit in blue. Now, make your PS3 search for new devices. After a little while the WEP200 should show on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros).
By the way, if your headset's user guide happens to be missing, feel free to download it from this location (if this link fails, please, let me know. I will upload it to some file sharing server for you).
Hope you are able to sort your problems out soon.
Regards, Carlos

You need to pair your PS3 with your bluetooth headset.

1. Turn on your PS3's bluetooth and search for bluetooth devices.
2. While the PS3 is searching and the BT headset is off, press and hold the call/end button on the bluetooth headset until it's light glows steadily. Do not let go until the PS3 finds it.
3. Pair the devices and allow the BT headset to connect automatically.
4. To connect, press and hold call/end button on BT headset like the one in step 2.
   

Is The Blue Tooth In Find Mode? To Inable Find Mode Hold The Power Button Until The Blue Tooth Stays Solid Lit Or Flashes. Then Search For It With Your Device And Once Completed Hit The Power Button Again And It Should Be Able To Pair Right Up.

if the headset is bluetooth then the ps3 should be able to connect with it while its in pairing mode form the settings menu. if the headset will not function without other software then the ps3 cannot use them. the ps3 will only read the select music, video, and game discs.

read the manual online
thanks!

After you have connected the headset to the PS3™ system, you can verify that the PS3™ system is receiving voice input from the headset
and that the headset is correctly playing output.
To test and configure your headset
In your PS3™ system’s home menu, go to [Settings] > [Accessory Settings] > [Audio Device Settings].
After you pair a Bluetooth® device with the PS3™ system, the Bluetooth® device becomes the default for both input and output audio. If the
headset is working correctly, you can hear your voice loopback in the headset. The audio input bar will indicate your voice level.

Hi, follow the steps to get your product paired. Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.) If the indicator light is flashing or does not remain steadily lit, turn off the headset and repeat step above. Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET Select (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. Select Motorola H350. Press OK or Yes to pair (link) the handsfree device. Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000. When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing. additional help http://www.motorola.com/mdirect/manuals/QG-H300_9495A08A.pdf all the best sreejith 2 Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset