Sir 010-398 in my colour xerox machine model no 1632 plese give me solusation whats problem give me answer

I am afraid that that foult code means that the machine's software has to be reloaded. The only way this can be done is by a qulified xerox tech. It need a laptop with special software to connect to the machine to do the download.

DocuColor 1632 can print on:

Plain paper (A4/210 x 297mm LEF):

? Black and white: 32 ppm; colour: 16 ppm

Transparency:

? Black and white: 13 ppm; colour: 7 ppm

Heavyweight 1 (106 to 169gsm):

? Black and white: 13 ppm; colour: 8 ppm

Heavyweight 2 (170 to 220gsm):

? Black and white: 8 ppm; colour: 8 ppm

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

---unistall yourd old printer driver

-to uninstall go to control panel. then find the name "system" click it then when windows apper click the hardware then find the printer name and right click then unistall ...

-----install the drivers again or download the latest driver..
in the website of you printer manufacturare site.

R/sir,
I have a Fax machine of Xerox make model PE220.From BSNL line connectivity is allways out of order.I want to connect FIXED CELLUR TERMINAL (FCT).After conecting machine give dial tone for outgoing calls.and other end caller received a fax tone on their machine when they want to make a call on my machine.But printer is not printing after some LCD diplayed a massage communication error.Kindly GUIDE me for change in settings.

Thanks and regards

PK Jain
(Pennywise)

Are you sure of the code? I dont see a 115 code for that machine. Could it be 116?????

Try reseating the waste toner then all 4 drums, see if the chips are mating.
Most likely either the machine software is corrupted and needs to be reloaded, or the MCU board has failed, could also be a bad laser, called the ROS.

Have you gone to the machine status and checked the drum, fuser and other values? More than likely one of the drum lives, fuser, IBT cleaner or some other component has exceeded it's life and needs replaced and the memory reset.

Your Ultra Mp3 Player
License Key : 27581

You need to Log an visit