I require a new rubber door seal for my electric oven stoves newhome efa600h. I cant find who stocks them

A PDF version of the Stoves Newhome EFA600H manual can be downloaded here: https://www.cookerspareparts.com/search/ckman-stoves/ckmod-stoves-efa600h/cksku-058585102

The Stoves EFA600H cooker manual can be downloaded here: https://www.cookerspareparts.com/search/ckman-stoves/ckmod-stoves-efa600h/cksku-058585102

hi Ali, do you have any photos for this cooker EFa600H? I need front of this cooker. because i have in my new home but i can't used this apliance because all numbers ale clean, someone clean this oven very very strong and remove all signs:)

cheers, marce

Free online manuals to download at the links below:

http://www.centralproperties.co.uk/wp-content/uploads/2014/05/Electric-Oven-Instructions-Stoves-EFa600H.pdf

https://www.manualslib.com/manual/1190592/Stoves-Efa600h.html

Try here:
http://www.manualsonline.com/ex/thread/view/idThread/3088468

What happens when you turn the power off to the whole oven, leave it off for a few mins and then reapply? If the automatic is still set it could be the clock is faulty.
Have you tried resetting the clock as per the handbook?

1. Open the oven door and remove the 2 screws at the side of the inner glass window 11cm above the hinges and lift off the door. Place it somewhere safe!
2. Remove the 4 screws that you can see nearest to the left and right edges of the oven with the door removed. These secure the oven to the kitchen unit.
3. Slide the oven forwards about 20cm out of the unit, being careful not to pull on the cable.
4. Each hinge is held in place by 2 screws at the side of the unit now exposed, about 18cm apart. Remove them and slide out the hinges. Reassembly is the reverse of the above.
5. Note that the hinges have no means of adjustment. If not working properly, renew them.

As this model is no longer current the best way to get one is directly from Stoves. Contact details are at the following Stoves Page

http://www.stoves.co.uk/Contact-Us.aspx

Try here:
http://www.manualsonline.com/ex/thread/view/idThread/3088468