Sir, I have samsung sgh j600 slider mobile.I forget my reset passward. When I given the default passward 00000000 it shown invalid passward. And my message box is not open. How can recover my passward to reset my mobile phone

Factory reset your setting it set all passwords to default which is 00000 or try to enter 01010101 as the code
https://www.apnaahangout.com/how-to-disable-mobile-tracker-after-forgetting-password https://ccm.net/forum/affich-503676-i-forgot-my-mobile-tracker-password

Instructions

• Power on without SIM
• Type in #0111*Unlock code# (8 digit unlock code*)
• Device should say: "Network Lock Deactivated"
• Phone may automatically reboot

*The 8 digit code can be obtained by calling the Mobile Operator Customer Care Department and given the representative the IMEI number. In exchange they will give you the Subsidy Unlock Code. Alternatively, you can go online and seek out a Subsidy Unlock site.

To obtain the IMEI number press *#06# on your mobile device.

thanks for rating

Just don't worry and use my TIP here

• RESET Security CODE and format LINK

Go onto google and search for whatever model your phone is a look for a reset code that you dial in.

the default security code for samsung is 00000000 it's zero x eight

Default code is 00000000

how can i unlock my samsung sgh-j600 phone for free

ok this is the factory password 8 zeros

00000000

plz rate this post

hi all,
stop saying progz, and cracks lol it's so easy, if u can compose numbers with ur phone SGH-J600 and have password in, if u can't read SMS, can't open provate documents or images folder here is the solution :)

*2767*2878#

Phone will be restored to default seting, he will restart and then u can config all again :)

Evilcode was here !!

The code is *2767*2878# with no card installed
This is a custom reset to factory default setting
This code is to enable to use your phone if it was locked

To unlock your phone to make it sim free ( any sim card can be use )
There is 2 codes that is necessary
Only 2 codes, do not do a full reset

Installed a non t-mobile sim card
The disply will shown WRONG CARD
Enter *7465625*638*00000000*00000000#
The 00000000 will shown as - - - - - - - -
There are 2 set of 8 zeros
Wait 20 seconds
The next entry will not shown on the display, enter with care
Enter #7465625*638*00000000#
Wait 20 seconds
Turn phone off
Pause
Turn phone on

Enter *#7465625# to check the phone lock status
All locks should be inactive
If NETWORK lock is still active
Enter #7465625*638*00000000#