What would be a new direct replacement so I don't need to rewire. Old radio Alpine CDM-7833

Look here:
https://www.manualslib.com/products/Alpine-Cdm-7833-2961647.html

http://alpine-usa.com/support/parts Please check support on this site.

did you go to the alpine website.

Hi,

To set or change the time, please refer to the instructions in the attached images:





For more details, download the complete instruction manual by clicking this link

Hope this solves your problem. Thanks for using FixYa.

there may be a switch on the bottom of the deck.

I didnt think alpines had codes?

are you sure it has one?

sounds more like a connection problem

what wirers are for power

try to splice the speaker wires into the end of rca cables

I found the users guide on Alpine-usa.com

The manual is for several models, the CDM-7833 is one of them.

It is her if you would like a copy;

http://vault.alpine-usa.com/products/documents/OM_CDA-7837.PDF

To set the time;

Press and hold CLK button for 3 seconds

While flashing, use the H and M buttons to adjust the time setting(s).

The time will be saved 5 seconds after a button is pressed.




Best of Luck

no you can't. i bought one from ebay b/c the guy said it would work but it didn't. after some research- i found the 7833/7835 will not accept anything through the DIN except the CD carriage.