Model numer RAS6233RQ0...only get humming sound, and nothing else

All I get on any setting is a humming sound and nothing else. The washer stopped once it filled with water and just gave the humming sound. I drained the water and am not searching this site for an answer.

help

2 more comments
smmcinto Jul 26, 2008

This happen to anyone else?? I have searched every site possible looking for an answer and got nothing.
smmcinto Jul 26, 2008

FIXED IT........I took up the cover on top.....unplugged the lid switch plug to reset it, plugged it in, and it works great.
smmcinto Jul 26, 2008

ok....nevermind.....too good to be true

now it works perfectly until halfway through rinsing it stops completely. So pretty much I think it just won't spin, it did everything else right up until that point. I can hear the click when I close the lid so I am not sure if it is that. I unplugged the timer and reset it again, and still get nothing.

HELP PLEASE, since after I drained it manually last night to try and fix it, thought I fixed it let it run, and now full of water again.!!!
Anonymous Oct 29, 2008

Same EXACT issue...

Same EXACT issue...

1 Answer

Anonymous

Yes i have a roper ras6233kg top load washer. I have not had any problem with it until about Two weeks ago, it over filled and it would only make a hummuing sound. Now it has dried out and have been working beautifully. Then Three days ago it stopped agitating,will not spin only making a loud humming noise. I guess its time to get another one.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I have a washing machine that when the washer drains and the rinse starts it stops and makes a humming sound and does nothing

What kind of washer is it? Some of them will do that until so much water has been drained out of it then it will spin. If you would like to know a definitive answer on your washer then I will need the make and model. It is usually located behind the door or under the lid.

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

Read full answer

Jan 17, 2017 • Washing Machines

0helpful

1answer

What will the washing machine do if the timer is bad. My Roper fills up with water and won't do anything else at all, doesn't even make a humming sound. Had to drain with cup. The knob for

From the closed position lift the lid of the washer about 2'' and listen for a distinct click. Then set lid back down and should hear another click just before it closes. The wire form hinge on left side of lid actuates the lid switch. Is it broken? Let me know.

Read full answer

Jan 26, 2013 • Washing Machines

0helpful

1answer

Front load washer stopped working

What is the model number listed on the washer?

Read full answer

Oct 13, 2012 • Washing Machines

0helpful

1answer

Washer stop before completely filled with water.

beko washing machine when turn it on it trips

Read full answer

Dec 12, 2009 • Kenmore Washing Machines

4helpful

2answers

I have a Roper Washer Model RTW4340SQD that

The lid switch is on the top left side of the top cover. If it is bad the machine will fill and stop. The lid switch must be good for the machine to agitate and spin.

Read full answer

Nov 01, 2009 • Roper RTW4300SQ Top Load Washer

0helpful

1answer

Kenmore TL Washer Just Hums

try to wash by 1/2 load the same cycle maybe the problem come from overload laundary

Read full answer

Jun 06, 2009 • Washing Machines

0helpful

1answer

A humming sound in the cycle knob

Make sure that the room is quiet then check that there is a clicking noise from the lid when it is nearly closed

If not then the microswitch is out of whack and needs adjusting

When you slam the door down it is probably enough to make the switch but then the machines movement will undo that action

Read full answer

Jun 02, 2009 • Kenmore 24032\24036 Top Load Washer

3helpful

1answer

Kenmore front-load washer stops at rinse cycle

When the washer initially fills for the wash, is it only hot water entering the drum? Try switching the water temperature between hot and cold as it fills. If any of them show little or no water getting through, it sounds too easy but check to make sure water supply taps are on, and that the cold/hot fill hoses aren't reversed. Remove the fill hoses and check any of the screen filters for blockage (in the hoses and in the inlet water valve). When the machine stops and waits to fill but all you hear is a hum, it sounds like there is power going to the valve but water is not able to get through it.
Good luck!

Read full answer

Mar 03, 2009 • Kenmore 43142 Front Load Washer

1helpful

1answer

My front loader has stopped in the middle of the cycle.

you need to clean your pump something is stuck not allowing the pump to drain

Read full answer

Dec 25, 2008 • Washing Machines

0helpful

1answer

Samsung Silvercare hums, but does not run

FIXED!!!! amen. Attached to the back of the washer was a plastic bag with a tech spec pamphlet. Inside the pamphlet were instructions for running tests via the front control panel on the various cycles to weed out the problem -- fill, spin, drain, etc. The test failed on the draining section citing a problem with the drain pump. So long story short and MANY towels later, I found a small finishing nail in the motor. I had removed the hoses thinking there might be a blockage, but found nothing. So I removed the motor and washed it out. Nothing odd there. So I took the front off the motor and found the nail. It somehow made it through the drain holes in the washer drum but got stuck in the motor. Thank you Samsung for taping the tech manual to the back of the washer. I could not find it anywhere on the web for this model. After discovering the testing available via the contol panel and the simplicity of the machine, I love Samsung.

Read full answer

Apr 01, 2008 • Washing Machines

Not finding what you are looking for?

View Most Popular

RAS6233KQ Top Load Washer

Washing Machines

I have a washing machine that when the washer drains and the rinse starts it stops and makes a humming sound and does nothing

Washing Machines

510 views

Ask a Question

Usually answered in minutes!

Are you a Roper Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Roper RAS6233KQ Top Load Washer? Or just drag it here!

Related Topics:

Model numer RAS6233RQ0...only get humming sound, and nothing else