My electrolux washer dryer ewx14540w keeps flashing e40 and won't do anything, please help

Hello Monica, thank you for your post!
Based off the information you have provided your Electrolux washer is displaying an error code of “E40”. I am showing that an “E40” error code means this could be an issue with your door swicth or main control board. I would recommend performing a reset on your washer and you can do that by disconnecting the power cord for at least ten minutes. If you continue to receive the error code once power has been restored you may need to seek assistance from a professional technician for a proper diagnosis. Hopefully this information is helpful to you. –Matt

I don't have an electrolux, but I have an LG front loader. Mine was giving a simular error code, and I found the drain hose filter was clogged. Bee running fine since

That is a generic error code - please reset the unit at the household circuit breaker for about 10-15 minutes, and then retry the unit. No difference - please consult a professional.

can be faulty door lock or wiring to the lock. also door ****** can be displace in the door . the handle shaft can slip out this stops door closing and actuating the switch correctly.e40 relates to starting the machine with door open.

Hello,
E40 normally points to a fault at the door switch,sometimes when the door switch fault occurs it can also cause damage to the main P.C.B.(Programmer).As this machine is still in the major parts warranty it would be advisable to get in touch with Electrolux.

The description of Ef 2 is told as error caused of excessive Detergent. Sir, Please consult another expert seperately for code Ed1. To tell, this error code is not described by anyone.

Thank you Sir, Have a nice day.

sounds like something in the pump assy or hose clear hose or replace the water pump

have power but does not rotate I NEED SERVICE ASAP

what is a (e40)

hi there e40 fault is a problem with your door interlock. get it replaced and all will be fine..