Canon Printer Pixma MP540 with error code B200 - what can I do? Thank you for your support. Arthur

The B200 Canon printer error can be caused if you have a faulty or improper printer print head. You can easily fix the canon B200 with simple methods.

·Clean the printer print head
·Check the ink cartridges
·Reset the printer

Read continue the steps to fix the B200 canon printer error. Also find the more canon printer error codes and their solutions.

The printer is no longer any good. I called cannon and they advised me that it was not repairable. they did offer a discount on a new printer. Hope this helps.

Canon Printer Error Code B200 may point to many different items, but it's essentially a problem with the overheating of the print head. Other than that, the issues usually have to do with the full waste ink tank, the full waste ink pad, and other parts of the printhead.

For the Canon Printer Error Code B200, Canon technicians recommend some generic solutions for this issue to users. This suggestion includes turning the printer off and turning it on. But we noticed some more comprehensive solutions for the solution involving dealing with the printer heads.

Easy Solutions that Fix Canon B200 Error

1.Turn OFF the printer
.
2.Unplug the printer from the power source.

3.Open the printer cover then reveal the ink cartridges.

4.Remove the printhead from the printer be careful.


Continue Reading - Canon Printer Error Code B200

Find a solution here:
B200

how to repair b200 error code on canon MX870 printer?

The error in Canon Printer Error Code B200 indicates a defective print head. A print head is an element that actually allocates the ink onto the paper from the cartridges, which ensures that it is one of the most critical aspects of the printer as a whole. Canon Printer Error Code B200, which can signify a hugely damaging system error, is one of the most feared.

Try these fixes before you go replacing your entire device. Follow this step given below.

1. Restore the doubtful cartridges
2. Extract and clean your printhead
3. Reseat your printhead
4. Check for obstructions

Solution - Canon Printer Error Code B200

It is referenced on other message boards that the B200 error means "Printhead Temperature exceeded", which can be caused by an ink cartridge running out, yet the printer continues the operation. You could try unplugging the printer for a couple minutes to let it cool down, and try again. If it still has the error, you'll most likely have to send it in for repairs.

B200 error means "Print head Temperature exceeded". In your to solve your problem you need to perform a printer reset. Click Here to view the Canon reset guide or you can follow the steps below:

1) Hold the On/Off button for 1 sec. until the printer shuts off.
2) Unplug the USB cable and then the power cord.
3) Press the power button for 1 sec.
4) Wait 10 minutes, then plug the power cord back in and then the USB cable.
5) Press the power button to turn it on again.


I hope this information will be helpful. Thank you for using FixYa!

Your feedback is greatly appreciated.

b200 is bad printerhead. I replaced mine and everything is working now.