Frigidaire PLEF398AC Electric Kitchen Range Logo
Posted on Feb 11, 2011

My oven is beeping F11. (i unplugged the oven because it was saying error and the electronice buttons would not respond. the oven had been on broil before this and was quite hot. what do I do now?

3 Answers

A

Anonymous

Hi,

The F10 F11 F12 F13 F14 Error Codes indicate that the electronic oven control board senses a runaway temperature condition in the oven through the oven sensor circuit.
This can be caused by a faulty oven temperature sensor probe or a failed electronic control board.
Oven temperature is detected by the control board as it monitors the resistance through the oven temperature sensor circuit.
You could have a failed oven temperature sensor, a wiring harness failure, an open thermal switch or a failed electronic oven control board that would cause this problem.
The first component to check would normally be the oven temperature sensor probe.
If you have a volt/ohm meter, you can shut off the breaker for the range and remove the screws that mount this sensor to the back wall of the oven.
Carefully pull the wire harness into the oven cavity until you get to the wire harness disconnect plug.
You should have enough slack to pull it this far into the oven.
Disconnect the sensor but do not let the wire harness retract back through the back wall of the oven or it will be hard to reconnect.
Measure the resistance of the oven temperature sensor with your volt/ohm meter. At room temperature, the resistance should measure around 1100 ohms.
The resistance chart is shown in the image below.

If the resistance is above 2200 ohms at room temperature, then the sensor probe is causing the F10 error code and will need to be replaced.

You can order a new sensor probe from the Sears PartsDirect website. The part number for the sensor is 316217002.

If the resistance is normal, then one of the other causes mentioned above is producing your F10 code.
You would need to access the electronic oven control board (Timer) in the console and check the resistance at the sensor circuit connection to the control board as the next step in troubleshooting this problem.


http://media.fotki.com/1_p,wbqdsfkrfqtswfqxgtqsskgwtqkq,vi/krdbrtqkgxkrbbqbrwb/1/1303472/5961857/image37801img-or.jpg


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Thanks to blueextc3221 for this solution.

  • Anonymous Nov 14, 2011

    4U Accept credit cards Act now! Don't hesitate! Additional income Addresses on CD All natural Amazing Apply Online As seen on Billing address Auto email removal Avoid bankruptcy Be amazed Be your own boss Being a member Big bucks Bill 1618 Billion dollars Brand new pager Bulk email Buy direct Buying judgments Cable converter Call free Call now Calling creditors Cannot be combined with any other offer Cancel at any time Can't live without Cash bonus Cashcashcash Casino Cell phone cancer scam Cents on the dollar Check or money order Claims not to be selling anything Claims to be in accordance with some spam law Claims to be legal Claims you are a winner Claims you registered with some kind of partner Click below Click here link Click to remove Click to remove mailto Compare rates Compete for your business Confidentially on all orders Congratulations Consolidate debt and credit Stop snoring get it now Special promotion Copy accurately Copy DVDs Credit bureaus Credit card offers Cures baldness Dear email Dear
    friend Different reply to Dig up dirt on friends Direct email Direct marketing Discusses search engine listings Do it today Don't delete Drastically reduced Earn per week Easy terms Eliminate bad credit Email harvest Email marketing Expect to earn Fantastic deal Fast Viagra delivery Financial freedom Find out anything For free For instant access For just $ (some amt) Free access Free cell phone Free consultation Free DVD Free grant money Free hosting Free installation Free investment Free leads Free membership Free money Free offer Free preview Free priority mail Free quote Free sample Free trial Free website Full refund Get paid Get started now Gift certificate Great offer Guarantee Have you been turned down? Hidden assets Home employment Human growth hormone If only it were that easy In accordance with laws Increase sales Increase traffic Insurance Investment decision It's effective Join millions of Americans Laser printer Limited time only Long distance phone offer Lose weight spam Lower interest rates
    lower monthly payment Lowest price Luxury car Mail in order form Marketing solutions Mass email Meet singles Member stuff Message contains disclaimer Money back Money making Month trial offer More Internet traffic Mortgage rates Multi level marketing MLM Name brand New customers only New domain extensions Nigerian No age restrictions No catch No claim forms No cost No credit check No disappointment No experience No fees No gimmick No inventory No investment No medical exams No middleman No obligation No purchase necessary No questions asked No selling No strings attached Not intended Off shore Offer expires Offers coupon Offers extra cash Offers free (often stolen) passwords Once in lifetime One hundred percent free One hundred percent guaranteed One time mailing Online biz opportunity Online pharmacy Only $ Opportunity Opt in Order now Order status Orders shipped by priority mail Outstanding values Pennies a day People just leave money laying around Please read Potential earnings Print form
    signature Print out and fax Produced and sent out Profits Promise you ...! Pure profit Real thing Refinance home Removal instructions Remove in quotes Remove subject Removes wrinkles Reply remove subject Requires initial investment Reserves the right Reverses aging Risk free Round the world S 1618 Safeguard notice Satisfaction guaranteed Save $ Save big money Save up to Score with babes Section 301 See for yourself Sent in compliance Serious cash Serious only Shopping spree Sign up free today Social security number Stainless steel Stock alert Stock disclaimer statement Stock pick Strong buy Stuff on sale Subject to credit Supplies are limited Take action now Talks about hidden charges Talks about prizes Tells you it's an ad Terms and conditions The best rates The following form They keep your money -- no refund! They're just giving it away This isn't junk This isn't spam University diplomas Unlimited Unsecured credit/debt Urgent US dollars Vacation offers
    Viagra and other drugs Wants credit card We hate spam We honor all Weekend getaway What are you waiting for? While supplies last While you sleep Who really wins? Why pay more? Will not believe your eyes Winner Winning Work at home You have been selected Your income

  • Anonymous Dec 12, 2020

    Thus, there is a need to uniquely identify each device that is a member of the internet. An IP address is something that helps with the same.https://192-168-0-1.website/

×

xevotip

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Dec 12, 2020
xevotip
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Dec 12, 2020
Answers
1
Questions
0
Helped
1395
Points
3

Thus, there is a need to uniquely identify each device that is a member of the internet. An IP address is something that helps with the same. https://192-168-0-1.website/

Ad

Carranza

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jan 09, 2020
Carranza
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jan 09, 2020
Answers
1
Questions
0
Helped
1395
Points
3

I have a Frigidaire brand gas oven with an electric range that has a touch pad used to control the oven (temperature, broiler, etc.). I got an f11 error with a constant beeping sound, so I tried unplugging and replugging it into the wall, which didn't work https://www.upsers.club/

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Reset circuit breaker to fix F11 or just plug stove in

How we solve toshiba washing machine E3 error?
0helpful
1answer

F13 tappan error code, what is it? tappan goes from code 12 straight to 14? there isn't a 13

the code is for the clock timer for bake and broil. The "clock board" will have to be replaced. About $120.
0helpful
1answer

How to fix frigidaire wall oven beeping error message f11

Good Morning Friend,

I understand that your Frigidaire wall oven is beeping and showing an F11 error code. Typically an F11 error code states that there is a shorted key, or a button has been detected as pressed for a long time. I suggest hard resetting your appliance, by cutting the power at your homes circuit breaker for 3-5 minutes. While you are resetting your oven, make sure to wipe down the control panel. The panel is very sensitive and could be detecting something that has splashed or spilled onto it, even dust. When you bring power back to your appliance you will need to start by setting the clock. Turn your oven on any cycle at any temperature. If you are still receiving an F11 error code, I suggest contacting your local authorized technician for further assistance. Hope this is helpful.

-Best Regards-
WP
0helpful
1answer

Dr error message

Hello Herb Reinhart - If the range previously displayed DR and now showing F11, it typically indicates that the unit has detected a shorted keypad. Since you have already try resetting the unit by unplugging it and issue persists, I would recommend contacting a professional to proceed further. Most likely the EOC on the range will need replacing.

1helpful
1answer

I get a F11 code with beeping noise and the oven controls won't work? what can i do?

Hi Ken Kazemi - Typically error code F11 indicates a shorted keypad. Try resetting the range by unplugging it or flipping the household circuit breaker off. This usually will clear most false error codes. Wait approximately ten minutes and if it proves to be ineffective contact a professional to move forward accurately. Most likely the EOC on the range will need replacing.

0helpful
1answer

After baking pizza oven started beeping and hasnt stopped. It says F24 and wont respond to any button commands except for the "oven off" button which just makes it beep faster. What can I do to...

well what i would do is turn off the power to the stove and let it sit for awhile this should reset it. let itset unplug for 30 minutes or so not just a few seconds okay. good luck
Feb 24, 2011 • Ovens
1helpful
1answer
0helpful
1answer

Beeping wouldn't stop, now it's dead.

F7 means you relay board is bad, you need to replace it.
Not finding what you are looking for?

1,405 views

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...