I had some water problems with mij krups and try to solve it. Now it gives an error 0D. What does this mean?

contact Krups directly and see if they have any clue

It says Contact service center if you removed the water filter and the error is still coming up.
They refuse to give a better answer than just to let it be repaired by them.

Error 6 means machine thinks it has a leak in one or more of the following
1) Distributor
2) Thermoblock
3) Pump valve
4) Pipe leakage
Repair will involve specialised tools and parts, not really the sort of job to attempt yourself. Contact Krups and get from them contact information for your local service agent.

I could not find any rteference for the *rb error, here is the link for the TSP600 manual:

http://www.star-m.jp/eng/service/usermanual/tsp600um.pdf


FAQs
http://www.starmicronics.com/absolutefm/absolutefm/afmmain.aspx?%0D%0A%0D%0Atopicid=&faqid=&question=

Drivers:
http://www.starmicronics.com/supports/starlegacydrivers.aspx

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Error code 07 on my Krups XP 7220 coffee machine what to do? Nick

it means de"CALC"ify its detecting calcium build up the manual says to run white vinegar without the filter followed by two clean water cycles goto krups.com to download the manual

i have the same problem now....how did yoy solve your problem?

On mine, the coffee dispenser had become stuck or clogged with ground coffee. cleaning this and giving it a bit of assistance on the next power up solved the problem. you will need to remove the two TX-15 torx screws at the front under the coffee flap/lid and the water flap/lid. there are also four screws down the back which dont have any screw driver slots in them. you will need a pair of vice grips or similar pliers to undo them. The top then lifts off and you can see down the coffee dispenser enough to clean it out. If you intend to test it with the lid off you will need to tape a magnet on the gray reed switch at the top (to simulate the ground coffee lid being closed). Obviously if you remove the two last screws at the bottom back you can easily remove the sides however in my case this wasn't necessary.

Try to change conduits to hotsync with PDS, if it will work then the problem is with the MSOutlook.

Generally this error means that HotSync manager (via the 4 Outlook conduits) is having a hard time connecting to your Outlook or, in some cases, specifically to your Oultook profile.