The display including the clock on my kenmore oven doesnt work including thje oven. what could it be?

Is the clock set to auto and not manual? Is the clock display flashing? If so then set to manual, this should do the trick

Hello,
What will cause that is a part on the clock that powers the display to illuminate has gone out yet the part of the clock (also called the electronic oven control) that send power to the heat elements is still working.It may work like that for years as long as you done mind the clock not displaying, OR to get it to display the clock/eoc would need to be replaced .

Gene

Hi, Mrsatow, Sorry, to give you some bad news. Your Clock Module/Oven Control Assembly is bad
and needs to be replaced. This item probably will cost you in the neighborhood of $200.00 plus labor to install You will have to provide your parts dealer such as Marcone Appliances or Sears with a model number in order to order this part. Hopes this help! Handy Henry


If you need further help, I’m available over the phone at https://www.6ya.com/expert/henry_239f63a136de60f0

PF Oven Error Code ShopYourWay

https://www.shopyourway.com/questions/1161483

http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/53991-error-code-pf-oven-not-working.html





A part replacement is suggsted in the links above, but a technician might discover something else, rather than a particular part, as the internet search showed several possibilities.

Same thing happened to our Kenmore range and I found a solution on the web about fixing this problem on a fridgedaire range. It was to hold down the clock button for an extended time ~15 sec. It worked for our kenmore and hopefully for yours too.

control is the oven clock . look for a code in the display . if no code . unplug or turn power of 5 min and retry. may need a colck .. mm

I also have the exact same problem, is ther a possible fix-it-yourself solution for this???????????? if not what should a repair cost?????

Wow, this post is going to be extremely late. Actually, I was able to get a new control unit for my Kenmore gas range from Sears Parts Dirext for $156.06. That includes shipping and tax. The burners work without it. We just cannot use the oven until the new board comes in. It's very easy to replace. Remove the panel screws on the back (just the top) and you have access to unplug the unit and remove the 4 screws holding the assembly in.

hi joe. thanks for the question . you replace the clock to repair your problem . i have seen this happen on a regular basis . thanks the appliance doc

There may be a fuse gone the oven works on 230 volts there also may be another fuse box under the oven behind a drawer or behind the oven. if all of that checks out ok, it sounds like you may need a new E.R.C. that would be the clock and control board. If all of your fuses and breakers are ok it would be best to have someone from Sears to look at it.