MWI for voice menu definition with muliple mailboxes

This is dependent on you being able to access your voicemail mailbox (a mailbox has been setup for you by the administrator and you know the codes to login to your mailbox). Go to your voicemail which should be:

1. press the message key.
2. Enter your mailbox number, then press #
3. Enter your password, then press #. (if you don't know this then you will have to contact the administrator for the telephone system)

When logged into this:

1. press 82.
2. Press 1 for external greeting, 2 for internal greeting, 3 for temporary greeting, or 9 for Personal Verification (spoken name)
3. Press 5 to record then wait for tone.
4. Press # to end recording
5. Press 2 to listen to the greeting
6. Press 76 then 5 to delete the greeting and re-record it.
7. Press 4 to return to your messages.

Try resetting the machine to it's defualt settings.

Call your office admin or local tech/vendor for assistance, they will get you a cheat sheet for voice mail admin.
Or look for Norstar Setup and Operation Guide.

A "mailbox not set up" message is coming from your telephone line voice mail system, and not from your telephone answeringmachine. What this means is that the voice mail on the phone line is picking up before the answering machine has a chance, and since the mailbox hasn't been set up it can't take any messages. So there are two things you'll need to do.

First, you'll need to set up your voice mail. You may need to contact your telephone service provider for setup instructions since not all systems are the same, but here's how it usually works. From your home phone, call your own number so you reach your voice mail. You should get the message that your mailbox hasn't been set up, and will be prompted for an access code to get to the setup menu. The access code is usually the last four digits of your phone number, and you'll be prompted to change it to something else as part of the setup. Through the setup main menu you can record your greeting and set up other options like the ring count before the voice mail answers. Set it for a number larger than the setting on your telephone answering machine. (I have my answering machine set to 4 rings, and voicemail set to 6.)

Step two is to verify the ring setting on your answering machine. Four rings is a common default setting, but it's adjustable on the phone. Most newer phones have menus that you access from the handset to set change settings, while older models have a switch on the base unit.

Once the mailbox is set up and you have your answering machine set to pick up first, everything will work as you want.

I am going to include a link to the administrator guide for you to download (its in pdf format). However here is what I found in the admin guide:

To change a password:
1. Access the voice mail administrator's mailbox and menu (see page 53).
2. Say "Mailbox Maintenance" or press to access the Mailbox/Group List Maintenance
option.
3. Say or enter the mailbox or extension ID to be accessed. You hear the Personal Options
Menu.
4. Say "Password" or press .
5. If you want a password, enter a new password using digits 0-9 (up to 12 digits) and
press when you are done.Voice mail plays back the password.
If you do not want to use a password, say "Skip" or press . Voice mail announces
that you have chosen not to have a password.
6. Say "Accept" or press to accept the password as entered, or say "Re-enter" or press
to erase and re-enter the password.
7. Hang up or press to return to the previous menu.

If this is not the right section then maybe one of these admin guides will help:

http://www.cmscomm.com/guides/axxesssAdministrator.pdf

http://pointz.com/pdfs/Axxess710AdminGuide.pdf

Hope it all goes well for you

Hello Debb,

Please visit the link provide below :

http://www.gen-i.co.nz/Solutions/Mobility/Device_Documents/Nokia%20E71/Setting%20up%20Voicemail%20on%20the%20Nokia%20E71.pdf

There maybe different MWI options available in the phone's set up menu on the base unit. If so, see if the different options perform differently. Your phones are probably set to "FSK" (frequency shift keying) for MWI but IIRC, U-Verse uses the "Stutter" option. Also, in addition to talking to the installer, call ATT tech support. If the problem is in the signalling they may now have programming options on their end to resolve it.

Is voice Mailbox setup? Have you enabled voice messages in menu. Should be able to press and hold 1 to connect to your voice mailbox...that phone number is automatically programmed on speed dial, key 1

The voice mailbox is a network service to which you may need to subscribe. For more
information, contact your service provider.

To call your voice mailbox, press and hold 1.
To edit your voice mailbox number, select Menu > Messaging > Voice messages >
Voice mailbox no..

On the smaller flash card type voice mails no. On the larger voice mails yes.The option would be under auto attendants (3) in the system administrators mailbox.