IM350 when battery inserted flashes green then goes to red. Tried battery in other gun and works ok. Tried full charged battery (green in other gun) and led goes red in this one. Measured voltage at 6.74v. cleaned battery contacts and measured voltage on conductor strip still 6.74. Any ideas?

Paslode im350Reliable, high-performance gas framing nail gun with low weight and excellent balance, enabling extended work periods with lower fatigue. Multi-angled teeth nose probe provides an additional bite to prevent tool sliding and ensure positive placement in timbers. The sequential trigger for safety. The lock-out function engages when only 3 nails remain.


1 x 2.1Ah Li-Ion Battery90min Charge TimeFires 3.1mm 51-90mm NailsFires up to 120/minFires up to 9000 Shots per Battery ChargeSequential Trigger ActionTool-Free Depth AdjustmentWithout Nose PieceWithout Battery IndicatorMagazine Window

the fan should run when u push the nose against a piece of wood if not it is not together properly if it is flashing green red before u start check all electrical connections ground at fan most likely not together properly

There is a head switch located in the handle on the circuit board - with the tool disassembled carefully (and making sure the fan motor and blade are clear) insert a battery and press the head switch to test - often the small metal roller arm that actuates the switch (part #27 on the diagram) gets bent or out of place.
If you have a new circuit board, green flashing light, and manually pushed the head switch - my guess is you have a bad fan motor.
This will typically cause the light to flash red or alternate red/green https://www.google.com/url?sa=i&source=images&cd=&cad=rja&uact=8&ved=2ahUKEwjp3JyUs7beAhVmm-AKHXw0DpUQjRx6BAgBEAU&url=http%3A%2F%2Fsupafixings.com%2Fproduct%2Fim350-parts-drawing%2F&psig=AOvVaw1zkn-GVHZiL6fr1Tuo10i1&ust=1541271770860917

Do the batteries charge? Are they charged? The green indicator normally is the status signal that the battery is charged and the red indicates that the battery needs charging or is charging. If you plug in a charged battery, some chargers will flash red momentarily then go out. This is an indication that the charger checked the battery (red light) and if the charge is good, the red light will go out. I hope this helps you.

Unplug. Check that you don't have a nail jammed in the end of it.

Welcome to the BlackBerry Support Community Forums.
Have you tried plugging the BlackBerry is different outlets or tried a different USB cord?

Does the BlackBerry show a charging symbol or is the LED flashing red or green?

I look forward to your reply.

Try a different gas cartridge and make sure the top of the cartridge is snapped tightly onto the cartridge body.

hi it could be your gun if it is flashing red&green this means theres a fault with the gun if it is just red try cleaning the battery treminals with a bit of sand paper some times they get a bit dirty and dont get enough contact with the gun hope this helps

Ok the lightning bolt is your power indicator: solid green-charging, Flashing green-fully charged, flashing red-low battery, flashing red three times the once green-bad battery. the "trash can" looking one is your hard drive activity indicator it will flash while your hard drive is reading and writing.

Hello,
Here's a copy from the owners manual:
■ Charging LED 
Red LED is on = Being charged 
Red LED is blinking = Charging error 
Green LED is on = Carging is complete


● If the charge indicator blinks as red, it indicates a battery charging error.
- The battery is not properly inserted
- The terminals of battery are dirty or damaged
If the battery is inserted properly and the charge indicator continues to blink, contact the
nearest Samsung Camera Service Center.


Another charging error is when the batteries are so depleted, they won't charge up to 100% anymore = red light doesn't go out and remains on for too long, means get a new battery.