How do i change the name on the extention - Panasonic KX-T7730 Corded Phone

If you are using this phone on a Panasonic KX-TDA 30/100/200/600 system -
From the Switcboard / Main telephone or Managers phone with the handset on the cradle/hook:
1. Press PROGRAM * * or PROGRAM * # followed by the system password ( default is 1234).
2. Now press 004 and then ENTER.
3. Enter the extension number you want to change.
4. Enter the name (the same way as texting on a cellphone.)
5. To save the changes press AUTO DIAL / STORE.
6. To go to the next extension press NEXT on the screen.
7. Lift the handset and put it down to exit program mode.

change profile name or go in standby mode and change name there

Depending on the type of phone, check the manual to see if you can change the extention number. If so you maybe able to replace the extention number with a name.

you would need to enter program mode and in MB 4-18 enter the correct names for each port(extension). ldtsnj.com

wat system using?
find out the adminstrator phone (pic to set the speed dial)
must hv displayed phone.
press MODE will see PHONE　NAME　press　HOLD　display　show　ID　DN　it　means　key　in　extention　number,　after　that　key　in　name,　press　HOLD　to　confirm,　repeat　step　for　other　extention　name
press　MODE　untill　time　appear

program,**,004,enter,(type in name using number keypad)enter, end.

Your name is in the Company Directory if you chose this option when you first set up your mailbox. To change it AFTER you set up your mailbox, press feature 9 8 1, enter your mailbox password, dial #, press ADMIN ( or 8 ), display should read
Mailbox admin
GREET PSWD QUIT
dial 1, at the tone record your name, press # to end recording, press # to accept, press RLS
It will look like you are re-recording your greeting but you are recording your " voice " name. Good Luck. ...Mike

You will have to go into system programming. If you are not familiar with it, you will need to call in a professional, as it is too hard to explain over posting.

MUST BE DONE FROM EXT.101

1.leave handset in the cradle
2.Press "Program" button
3.Dial *#1234 (star pound 1 2 3 4)
4.Press Sp-phone button 3 times
5.enter the correct hour on the dial (2 digits)
6.press the button (in the lcd window to advance to minutes)
7.enter the correct minutes
8.press auto dial/store button
9.pick up hand set/ hang up hand set.

What sytem is this phone on? That model can be on 3 different models....