How do you get a device to work properly when the computer says that there are no drivers

Mscank is a system driver file which may be associated with any hardware device.


Open device manager to check which hardware device is not functioning properly on the computer and uninstall it.

a) Open Device Manager by clicking the Start button.
b) Click Control Panel, click System and Security, and then, under System, click Device Manager.If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
c) Now check if any device has any yellow exclamation mark on it.

Once you find any device with any mark, right click on that device and later click on Uninstalloption and restart the computer and check if it works.

If you are unable to find any device with any marks then check by enabling hidden devices.

a) In the device manager click on View and later click on show hidden devices and check if you find any device with exclamation mark and uninstall it

If the above step fails run Windows update to check and install recommended device driver update on the computer.
Update a driver for hardware that isn't working properly
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

If all the above steps fail then contact the manufacturer to get the driver update for all the device connected to the computer.

the drivers might be installed properly for this device
click start control panel administration tools computer management device manager scroll through all of your devices if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver
if you can see your usb device but its not working sroll to Ports(Com&Ltd) right click to update driver if you computer came with a motherboard disk the drivers could be on it

1

Click the link "hp: Modem Driver Installer for Microsoft Windows XP (32-bit)" listed in Resources if you run the Windows XP operating system on an HP computer; for Windows installed on a Toshiba computer, go to Step 3. For all other types of computers running Windows, go to Step 4.

2

Click "Download" from the HP website and click "Run" to install the high-definition audio (HDA) modem driver package. If the modem device does not work properly after the driver has been installed on your Windows XP computer, go to Step 9.

3

Click the link "Toshiba Audio Drivers" if you run Windows and use a Toshiba computer. Find your operating system, click the appropriate driver listed and then read the installation instructions on the screen to download the driver. If the modem device does not work properly after the driver has been installed, go to Step 9.

4

Click the "Start" button and click "Control Panel."

5

Click "System and Security" and click "Device Manager" under "System."

6

Click "System Devices" and right-click the "Microsoft UAA Bus Driver for High Definition Audio" device.

7

Click "Update Driver."

8

Update the "PCI" description drivers (PCI bus and PCI device) and any modem device that displays an exclamation point to the left of it. If the modem device does not work properly after the driver has been updated, go to the next step.

9

Visit the computer hardware or operating system manufacturer's website for further support

use the foll website for driver downloads http://www.emachines.com/support/product_support.html

Check the device manager for any conflicts with the drivers. There would be "Other drivers" listed if there was any drivers that were not installed correctly. If there is any listed try right clicking on them and selecting to reinstall drivers.
To get to the device manager:
Right click on my computer or Computer > select properties > then click on hardware tab on top then device manager or click on device manager link.

Computer Repair - Support
www.jdtechsource.com

Have you checked the encription method (WPA or WEP) - usernama and password or just a password for the second type

You can try going into your sound driver and selecting properties. Try rolling back driver. If that doesn't work, go to device manager, select sound card, uninstall device, reboot computer and let windows reinstall the device. At that point windows should load its latest driver.

The "No Audio Device Error" message is usually displayed by your computer when it does not detect any properly working audio device attached to it. You will not hear any sound from your computer when this message appears. Only the internal speaker of the computer can provide you bleeping sounds.
When this message appears on your screen, you will need to first check your computer's BIOS and ensure that the audio is set to "auto" mode. You should also check if you have installed the correct drivers needed by the audio device attached to your computer in order for it to work properly.
Audio Device Drivers The most frequent cause of this problem is an incorrect audio device driver that has been installed by the user. In order to double check if your driver matches your device, refer to the user's manual that came with it to look for its type and specifications. The audio device driver for an onboard device should be provided along with the chipset drivers in the CD that accompanies the motherboard.
Use the Device Manager You can use the device manager to ascertain if the audio device drivers are installed properly. To go to the device manager, right click on the My Computer icon, then click Properties, click on the Hardware tab and then Device Manager. If any device is marked with a yellow question mark, it is an indication that the required drivers are missing. It should be instantly clear if the audio device is truant.
Loose Connections on the Motherboard You can open your computer and directly look at the information written on the audio device itself. While doing this, make it a point to check all connections by ensuring that everything is properly plugged in its correct place. Sometimes, this error is also caused by loose connections and a sound card that has been improperly attached to the PC.
You can download the latest updated drivers from the manufacturer's website, either from your own computer or another. If you have used another computer, you can use a data storage device to bring the drivers to your machine and execute the software installer from there. Ensure that the driver you have downloaded is compatible with the operating system installed on your machine.
Is Your Audio Device Defective? If problems with your audio device still persist, you can opt to test the audio device on a different machine just to see if it's in good working condition. If it still doesn't work on a different machine, you have a defective audio device. You will need to get it replaced if it is under warranty or purchase a brand new one. Remember that you should buy the audio device that is compatible with your motherboard. In addition, don't forget to ask for the updated software drivers of the audio device

Unplug external USB devices and wait for sometime,now reset our machine and access in safe mode, run Reginout Scan.

This is usually happen when the scanner driver is now properly intalled. So rt on my computer, click on mannager ,device mannage, choose the scanner driver , click on uninstall the driver. or remover the device. restart the computer. on the scanner then your computer will search the for the driver then place the disk driver and setup the driver. i hope that your sanner will work.