DISH WASHER WON'T DRAIN BOSCH SHE45M - Bosch Dishwashers

Here is a Helpful link. http://forum.appliancepartspros.com/dishwasher-repair/550664-dishwasher-e24-drain-error.html

use grease

either the pump is faulty or there is a blockage in the outlet drain.

if you hear pump working then clean the filter and the kitchen drain. If pump is not working then replace it.

Hello & Welcome to FixYa

E13 error in your Bosch WFMC washer is a drain error and is displayed when the drain time exceeds & the washer is unable to drain so the door won't open sometimes when this error is displayed. You will have to clean the drain trap in the bottom right hand corner. You can stick a straighten paper clip in the access panel located inside the front bottom panel through the whole and then turn the access panel counter clockwise to unscrew the plastic drain cap behind it. After everything is cleaned and the error returns then replacing the drain pump is recommended repair. Please get back to me if you have any other questions.

Kevin

I just had a tech over,have the same problem with my SHE45M. Was told the plastic impeller is spinning on shaft. New to replace the drain pump.

there is probably astuck peice of glas in the propeller. manually drain unit. take a torc screwdriver and remove screw in bottom of unit. you are removing a piece that looks like a plastic cover. now carefully spin the propeller and take out what is stuck ,put back screw then hit cancell and drain. that should do it. let me know if this was helpful

THE DISHWASHER DO NOIT DRY THE DISH

Hi..
please check whether you have something in the drainpump locking it up or a blockage somewhere between the sink and the unit or the pump itself has failed or not.
thanks

Helloduranjp,
Welcome to fixya.

You said, Your Bosch dish washer won't work. A number 1 is displayed on the electronic panel.

If it is displaying"01" then that means the extra dry setting is being applied!
Did you try to use the extra Dry setting?
Did the dishwasher work before this or is it brand new?
What is the model number and year?
Let me know ! I'm waiting for your response

Below is and example of the usage of 01 or 00 in a Bosch Dishwasher!

Extra Dry Heat
With this option you can raise the temperature of the rinse water and increase the drying
time which will result in improved drying.
To activate :
Press and hold the left cancel drain button ,
Then press and hold the on/off button when the LED display shows a, "00" or a "01"
To enable the additional drying heat,press the left cancel drain button until the LED display shows a "01"
To disable the additional drying heat,press the left cancel drain button until the LED display shows a "00"
press the on/off button to save the settings.

Huuum

usually it is the water level control switch which can be found at the link i provided for you http://www.appliancepartspros.com/repair-help/maytag-dishwasher-wu304-repair/wu304-will-not-drain.html