At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have two different cordless 21.6 volt drills that have died within a week of one another. The first went from doing fine with a hole-saw blade to completely dead, and the second, i think the bearings are gone. Can/will/does Kawaski refurbish or am I just shopping for another one to go with all the batteries I already have?
Re: I have two different cordless 21.6 volt drills that...
Take back and get rigid tools from home depot,gauranteed for life,if you have money buy hilti tools,offerd by home depot,been using hilti tools forever,there the best but spendieee
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
21 cm is 8-1/4 inches. You could use an 8 inch blade or 7-1/4. But the diameter of the blade is not the critical thing. You must have a correctly fitting hole in the blade to mount on the saw shaft. Standard English size of the hole is 5/8 inch. Just take your saw with you to the store and try a blade on it. If the hole is a nice fit, your are good! (You posted this under circular saws, so I assume your saw is portable.)
If the threads are not bound, you might be able to use a sharp pick to work the broken part out. Otherwise, you will have to drill out the center of the bolt with a small drill bit and use an 'easyout tool' that will fit tightly into the drilled hole which will allow the piece to be backed out. Good luck!
I couldn't find one, looking everywhere. The newer Coleman chargers are a different size. The red charging light would not come on. Using a meter, I figured out it wasn't the charger, but the power adapter. I found one online that fixed my problem and now I can charge my batteries for my Coleman impact drill. From Digikey.com
I have a Ridgid brand battery operated circular saw 18 Volt and it works very well for a battery operated saw. It eats 2x4's and 2x6's very well. I have noticed that when the blade only gets slightly dull it will not cut worth a darn. Keep a sharp blade on it and maybe try a different battery. A battery powered saw is NOT a replacement for a plug in saw, but they sure as heck are handy.
Cutting a 40mm worktop should be no problem unless it is a hard wood. If it is a hard wood you might need to get a plug in saw and a very good blade.
By 3 pin do you mean the third pin being a ground. If so that charger does not have anything internal to ground to. It is a 120Volt Double insulated tool. Let me know if you are trying to do something different.
Hammer Drills combine the rotation of a regular drill with a pounding action. These two actions enable the hammer drill to bore holes in masonry quickly without burning the bit.
×