I have a Epson Stylus Pro 7600. How can air get in the lines?

sir the printer head of your printer is already thin... try to change the printer head...

When u change the printhead on this unit you must be very sure that u unplug it from the wall before u remove the ribbons.t is important that u disconect the line in question from the damper. Take a serenge and start priming the line, make sure ur cartrige is in place, don\'t worry u wil not lose the ink. Prime that thing until u see no more bubbles . Re connect the damper and once that\'s done prime the damper until its full, connect to head Andy should have a working line. If ur serenge is full of ink u can inject it back in the cartrige. Do not do this while printer is on or u will invite more bubbles.....mike

epson 7600 black ink failure

Hi.
Try to visit this link http://members.driverguide.com/driver_search.php?q=epson+stylus+pro+7600&si=0fcddc61e5693c3a8a59a350aa660ee4&st=1308811828&gqm0=epson+
To get free software driver for Mac O.S. just join ,sign up and type epson stylus pro 7600 and click
search icon.

Hope can help you.

Hello. With Epson 7600, "bubbles mean troubles". If you have done the power cleaning

I'd suggest just performing a cleaning cycle as this will also get rid of air in the ink tubes.


If you realy have a need for it holding down the following buttons at power on enables you to enter the service menu: paper-source + paper-feed-down + cut/eject
just be really careful as you can cause a lot of damage within this menu to your printer.

i have compiled some links here hope this helps

http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp?BV_UseBVCookie=yes&oid=-10235&infoType=Overview

http://ftp.epson.com/pdf/pro76u/pro76uu1.pdf

http://www.jesseheap.com/EPSON%207600_9600%20Field%20Repair%20Guide.pdf

You need to either buy AGFA cartridges ot apparently you can take the chip off the AGFA cartridge and put it on a Epson or compatible. It will always say it's empty but should still work

Service required mean waste ink counter overflow. You need to reset it. SSC Service utility don't work with this type. The resetter is not for free, it's commercial. Only some distributor have it.

Yes the cartridges are Epson.