Have gateway fpd1730 moniter what is the difference between lcd anolog

Gateway Monitor Repair Complete

This sounds like the Lamp or PCB inside of the monitor is failing. I would check warranty status of the product and replace it.

The factory reset is in the on screen menu, the Auto set button is for syncronizing the signals to the PC video incase it went out of sync.
User manual from Gateway: http://support.gateway.com/s/Manuals/Desktops/8510137-web.pdf

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

press the menu button on screen panel and press exit.

It is a hardware problem. So you can repaired it from service center.

To solve your problem you can go to any rad shack or electronics store and pick up a DVI-AVG adapter. The're about $14.00.

tell me in detail the exact problem...i can solve it

Try using it on a different computer, it's possible that it is your graphics card causing the problem. Check for bent pins.

You need a vga to dvi cable, your local PC shop should be able to help.

I picked up a FPD1730 monitor for free which was just sitting out in my apartment hallway. I suspected something was wrong and sure e**ugh there was ** backlight, but I could see faint video when I shined a flashlight on it.

A quick Google search of the inverter model # led me to a German forum which suggested replacing the fuse labeled "F1" on the inverter board. I don't have a matching fuse on hand but I bridged the connection with a wire and sure e**ugh the backlight came back on. Short-circuiting like this is definitely **t 100% safe but if you can find a 4A fuse then it's a really cheap and quick fix.