How do I set the time on a Acu Rite 13003-7-2 alarm clock.

Hi Mona,

To set the time on your 00604 thermometer.
Press and Hold the Time button until the Hour begins flashing.
Release Time
Press and Release the + or - buttons to adjust
Press and Release Time and the Minutes will flash
Press and Release the + or - buttons to adjust
Press and Release Time to lock in your setting.

Hello
Get into this link. You can get all the details for your clock radio from there.
lib.store.yahoo.net/lib/partshelf/Acu-Rite-00592W-Manual.

http://www.acu-rite.com/product-manuals.html
http://www.ehow.com/way_5552159_acurite-atomic-clock-setting-instructions.html
Please find what you want at the above links....

the button for this is on the back of the clock

You can get the manual on the link below.

http://www.acuriteweatherstation.com/modelmanuals/INST_13131A3.pdf

Before attempting to set the time, let the outdoor transmitter sync with the indoor receiver. Once that's done, you'll be able to successfully set and retain the date and time.

take a look at Chaney Instruments http://diplodocs.nl/references.php

Wireless Thermometer with Sensor
Model 00735 ??

Press Set-up, third round button from right and hold it down until "hour" on the time display flashes. Then press "set-up" again, and again (for me it was 8 times), until you get to where the "C" is flashing you want to change to "F." Now, press "Min" on the far left once to change it to "F." Press "set-up" two more times to get out of the cycle, and you're done.

How do reset time on model 13003 ?? It reads 12:15 and the Time is 11:27 Clark page [email protected]

I think I solved the problem, take out the batteries and reinstall and then reset, seems to be doing ok now.