Printer how to print on transparencies with a dell 3010cn

However I was able to find a driver for your printer here: http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R144508&SystemID=PRN_LSR_3110CN&os=MAC1&osl=en&deviceid=9510&devlib=0&typecnt=1&vercnt=2&formatcnt=1&libid=40&fileid=192663

Hi,
It is most likely be due to dust/ toner dust accumulation at the laser reflecting mirrors inside the copier, which partially blocks laser beams and results in faint print. Therefore the printer requires cleaning/ servicing by a professional.

Hope it helps! Good Luck!
CreativeTECH

The Paper Cover is located on the top of the printer. It is the vented panel just behind where your printed documents come out. It lifts up to clear paper jams, and documents won't print until it is closed. Just push the panel down until it clicks in place...that should do it!

There could be dust/ Toner Dust accumulated on the mirrors and lenses inside the printer, which partially blocks laser beams and requires cleaning/ servicing by a professional.

Hope this helps! Dont forget to appreciate the solution!!
CreativeTECH

SEARCH AT Welcome to Dell Support

The 3010CN is Manufactured by Dell, Inc. so no affiliation with Lexmark. I know this because 1, I am in the printer service business and I have a cross reference for just about every printer made. The 3010CN has no cross reference therefor it is Made by Dell. Second the CNET review of this printer states that the Manufacturer is Dell.

goes through below link i hope it will help you.....

http://en.community.dell.com/forums/p/18111151/19403181.aspx

This is application driven and you will need to set this up from your application or when you File / Print select the Print Preferences for the Dell 3010cn and then select borderless printing

Often Toner sticks to fuser. When the fuser heats the toner comes off onto the paper. Should reduce over time unless toner is spilling onto the fuser in the same place.

Change fuser and toner

thanks

Check for damage to the fuser located right were the paper exits. damaged fuser can cause lines