PT5598HDI Wiring Problem

buy the new tv.k

If the ghosting is like a 3D effect its your convergence ICs , but if its like a blue Halo around objects that usually means your CRT coolant has congealed and will need replacement. The blue is the first tube to congeal for some reason, followed by green. Red seems to be not quite as prone to this. It is a normal occurrence n sets about 4 years old to need the coolant changed.

http://www.fixya.com/support/t1663670-akai_samsung_pt4299hd_convergence Adjust the convergence manually. It's a pain and takes alot of patience. The diagram for the remote buttons helps a lot. If it won't adjust you'll have to replace a part inside the tv. Good luck! Hopefully it'll adjust.

This problem is beyond a blown fuse most likely. The fuses for the unit are located on the circuit boards and the back will need to be removed to access them. This problem could be due to a missing voltage that is used to turn on the picture section of the electronics. I would search for a used unit on ebay or parts on ebay and swap out the boards. The board swap is not too complex but voltages are dangerous within the set and service by a qualified electronics technician is recommended on this unit. Thanks and good luck. Dan

replace your convergence IC chips it is not a fuse problem.

Open the back of the tv and check Fuses, sound like the high volt over loaded

Convergence IC's
replace them.

Sounds like a power supply issue. Does the power indicator light up? Can you hear a click when the power button is pressed?

More likely Icz103 & Icz104 the convergence amps. Are they heating at all?
Bill

go to settings! then select auto search!