Pogie14 if you still have the power supply email me at tropicalseas hotmail
I had the same problem and followed these steps and it worked! Please be aware that the button is small, maybe 3 mm diameter. It is indeed to the right of the main processor and in my case it was directly below a bright yellow circular sticker. I pressed the button and had to wait for the noise to stop, then the tv turned on when I pressed the power. At first there was a noise after depressing the button and it did not stop. The power would not go on at this point. The noise had to stop before the tv would power on. I had to play with the button a bit & try different things but keep trying.
You'll need to remove the metal casing over the top of the board & I had to bend the casing a bit to access the button but it worked!
Where is this located? Do u have to take back of tv off?
×
Long story short:
Had the same problem with my Soyo.
Thought it was the power supply board problem that everyone else was reporting.
ordered one. Plugged it in. Did not work.
Inspected the Main/Logic board and found what looked like a black button that could be depressed. It is located to the right of main processor on the board. You can't really miss it.
With the TV plugged in, I pressed the suspect button. The TV made a buzzing/clicking noise for a few moments and the stuck blue illuminated power button faded away.
Curious by this, I pressed the power button and low and behold the TV comes to life!
Looks like I found a "reset" button which seems to have fixed my problem.
Thanks Soyo for not bothering to mention that such a button exists.
I hope the rest of you have the same good luck. In the event you are still in need of a power supply board, email me. I have a spare now it seems. ;)
SOURCE: Soyo 32
Long story short:
Had the same problem with my Soyo.
Thought it was the power supply board problem that everyone else was reporting.
ordered one. Plugged it in. Did not work.
Inspected the Main/Logic board and found what looked like a black button that could be depressed. It is located to the right of main processor on the board. You can't really miss it.
With the TV plugged in, I pressed the suspect button. The TV made a buzzing/clicking noise for a few moments and the stuck blue illuminated power button faded away.
Curious by this, I pressed the power button and low and behold the TV comes to life!
Looks like I found a "reset" button which seems to have fixed my problem.
Thanks Soyo for not bothering to mention that such a button exists.
I hope the rest of you have the same good luck. In the event you are still in need of a power supply board, email me. I have a spare now it seems. ;)
SOURCE: how to remove stand on vivo 32 inch lcd tv
if you send picture to [email protected] , i can try to help you
SOURCE: remote control code for 32 inch lcd EMERSON TV
I succeeded is using the DirectTV remote control for the Emerson 42" plasma TV, by using a Samsung code. On my TV, was 10060. If this one does not work, there are a bunch of others that might work. Good luck
558 views
Usually answered in minutes!
Same problem with NO power. 32" soyo about 3 yrs old.
same problem ... i unplugged it once for a couple minutes and that seemed to work.. but not this time piece of ****
get no power when plugged in at all
same **** about 2 years old
i took out of plug to move it then i doesnt turn back on im PISSED
Also, about 2 years old.
my IS-LCDTV32 32 in. Television is stuck in output 2 in tha menu cant accses menu is there a way to reset the tv
power botton will not stay on either by the remote or manual it goes green fro asplit second and right back to the off position
power lite is on well not shut off but no picture
did this really work? I have the same issue and IO'm about to thorugh this thing out!! not sure how the TV comes apart is it that hard? hm..
Tried the little back button.It cut the power off but nothing more.pressed it held it tried it plugged in unplugged.just cuts the tv off.once main power button pressed,powers on reads"TV GEAR" then nothing.any other suggestions?
I have the same problem, sound but no picture.
×