At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Flame sensor,just take some fine sand and lightly sand,it will be where the flame hits one of the burners,should look like a probe,if this helps please give me a fix ya
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are several possible causes for the described issue with your Empire BF-30-2 heater. Here are a few things to check:
Dirty or clogged burner: A dirty or clogged burner can cause the flame to diminish or go out. Make sure the burner is clean and free of any debris.
Low gas pressure: If the gas pressure is too low, it can cause the flame to diminish or go out. Check the gas pressure and make sure it's within the recommended range.
Faulty thermocouple: The thermocouple is a safety device that shuts off the gas supply if it detects that the pilot light is out. If the thermocouple is faulty, it could be shutting off the gas supply even though the pilot light is still lit. Check the thermocouple and replace it if necessary.
Faulty gas valve: The gas valve controls the flow of gas to the burner. If the gas valve is faulty, it may be shutting off the gas supply even though the pilot light is still lit. Check the gas valve and replace it if necessary.
Oxygen depletion sensor (ODS) tripped: The ODS is a safety feature that shuts off the heater if it detects a low oxygen level in the room. If the ODS has tripped, it could be shutting off the gas supply. Make sure the room is properly ventilated and reset the ODS if necessary.
If none of these solutions solve the problem, it's best to contact a qualified HVAC technician to diagnose and repair the issue.
Is there a way to check for gas pressure even if just a slight loosened connection to hear it then quickly re-tightened. Otherwise the main valve is not working as it should and will need to be serviced or replaced. Thats all i got.
The thermocoupler is no good. It's that bulb sitting in the pilot flame. when it goes out it shuts everything doen in the main valve. It has to be kept hot by the pilot, that's how it know whether or not it is safe to open the main .
Actually I fixed it by blowing out the pilot gas orifice.
×