The Toggle switch threaded part on our Liquidiser has broken off, so we need a new toggle switch----one way latching (on-off-mom),the rating shows 3A,250VAC.the liquidiser has 1/4 HPmotor Can you help by advising which of the switches shown is suitable & the price?

Get a switch with the same or higher voltage and current rating, and similar mounting and terminal connections. If you can't find the rating on the switch itself, use the nameplate rating on the appliance label.

Once you have these numbers, go to the Carling Tech toggle switch page and drill down through the selections to identify what you need. Toggle Switches

You want toggle switch that mimics operation of pushbutton, except you want SPDT.
For example doorbell button is a momentary SPST
http://www.mrsupply.com/leviton-5657-2w-double-throw-ctr-off-momentary-contact-switch.html
http://www.csnlighting.com/Legrand-TM811DTMOBK-LEE1616.html

For others finding this thread: Many people want double throw switch for 240V, thinking they have to turn off both hot legs of 240V circuit.
240v can be turned off by cutting power to one hot leg.
http://waterheatertimer.org/B220C.html

Most laptops will show the desktop on one or both screens You can use function keys with common combination such as Fn + F5, Fn + F3, Fn + F8 and Fn + F9 to toggle between the two screens. Refer to the laptop's user manual for the right key combination to toggle between the displays. Alternatively, with many laptops you can also switch to the extended desktop mode. This means your desktop screen will be stretched across both the monitors. Refer to your user manual to switch to this mode.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy New Year!

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

I have the aggressor scooter as well. You don't need and probably will be hard to find the toggle switch you mention. Just go to Radio Shack or Frys with the switch and find the one that match the power rating and profile of the old switch.

I know that you can press the S↔D just above the DEL key. By pressing this key the answer will toggle between fraction and decimal display. As far as locking the calculator into a mode that will default to decimal results, well... that's why I'm here looking.

A toggle switch is a common item. Remove the broken one and take it to a hardware store where they will match it up so u will have the new one u need.

hi there
on the back of this unit is a green brake wire you need to buy a 3 pined toggle switch ...........you need to take a small but mid size length speaker wire and attach to 12v (red wire) going into back of kenwood unit add another speaker wire to the ground wire (black wire) of kenwood unit... now on the 3 pined toggle switch add the power speaker wire to the toggle switch add the ground speaker wire to the toggle switch once this is done add the green wire to the last toggle switch pin........put the kenwood unit back in dash.......now turn the car and toggle switch on...........put in a DVD and if screen shows DVD all is done...... but if the screen does not show the DVD......just switch the green wire with the black wire on the toggle switch and now it should work
hope this helps

hi there
well to start the e-brake will need to be applied to allow you to see the video if it was installed correctly.................to over ride this feature you need a toggle switch with 3 pins on it
on the toggle switch there should be two logos (power & ground) if you run a small wire from the red wire from the back of your in-dash system to the toggle switch (power) and do the same for the black wire (ground wire)..........the last pin on toggle switch you attach the e-brake wire from the back of your in-dash system to the toggle switch pin and turn it on video will play
if this doesn't work switch the e-brake and ground wire around on the toggle switch
hope this helped

the only way you could try to fix it is if you opened it up and checked it out from the inside.  if nothing wrong inside, then it is something wrong with the motherboard and you will have to buy him a new one. but if you get it open then you can pop the toggle switch into place and it should be fine

F5
E0
E1
DOOR AND LATCH SWITCH DO NOT AGREE
DOOR LATCH NOT OPERATING.
PROCEDURE: Before proceeding, press OFF, OFF, START to enter
the Diagnostic mode and verify the error codes.
TO VERIFY DOOR SWITCH:
A. While in diagnostics, open the oven door. The second digit on the clock display
should toggle between “1” and “0” as the door opens and closes. When door is
closed display should show “1”, when the door is open display should show “0”.
If the second digit on the clock display did not toggle, go to step B.
If the digit did not toggle after replacing the door switch, go to step D.
If the digit did not toggle after replacing the door switch harness, go to step F.
B. Unplug oven or disconnect power.
C. Replace door switch. (If door switch is integral to the door latch motor
assembly, replace the entire door/latch motor assembly). Go to step H.
D. Unplug oven or disconnect power.
E. Check the integrity of the harness wires and connections between the
appliance manager and the door/latch assembly. Ensure there are no shorted
or pinched wires.
If the wiring harness is pinched or damaged, replace the door switch harness.
Go to step H.
If wiring harness is good, go to step H.
F. Unplug oven or disconnect power.
G. Replace appliance manager. Go to step H.
H. Replace all parts and panels before operating.
I. Plug in oven or reconnect power.
J. Press OFF, OFF, START to reenter the Diagnostic mode and complete checks.
Repeat step A.try this lighting may have knocked either the door switch or latch motor out