Windows vista is unable to format DVD+R and with a other burner program I get the following error:
19:17:00, File(cl_DVDData.cpp), Line(193)
-> Begin burning process
Current drive: <G: HL-DT-ST DVDRAM GP08NU20 1.01>
Current writing speed(x): 4.0
====== Disc Info =======
Disc Type: DVD+R
Disc Status: Blank, Appendable
Num. of Sessions: 1 Num. of Tracks: 1
Book Type: DVD+R
Track Path:
Parallel Track Path
Diameter Length: 120mm Layer Counts: 1
Data Area Start PSN: 196608 End PSN: 2491711 End PSN on Layer 0: 0
End PSN : 120mm Layer Counts: 1
Disc Capacity: 2295104LBs
Free Size: 2295104LBs Used Size: 0LBs
========================
Burn option: w/ buffer underrun protection
Burn option: w/o simulation
Burn option: w/o close disc
Burn option: w/o verify disc
FS type: UDF_102
Burn mode: PACKET_INC
19:17:00, file(cl_DVDData.cpp), line(3387)
-> Begin new track: 1
19:17:00, file(cl_DVDData.cpp), line(3418)
-> Write data
Last write LBA: 0
19:17:06, file(cl_DVDData.cpp), line(3551)
-> End new track
19:17:06, File(cl_DVDData.cpp), Line(307)
-> Burning Fail, ErrCode: 0xeb020b88
can somebody help me?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it can not work anymore, you should get a new one for you game, for cheap CDKeys, you can have a view on https://www.m8x.com, other Games Gold and Games Items are available there, you can have a view there.
Have you tried checking your basics ?
Firmware ?
ASPI ?
Disk Defrag ?
IDE location ?
Jumper settings ?
What type of media are you using ?
What programs are you using ?
Exactly where are you and what are you doing when your error occurs.
What are your PC's specs ?
Do you have any Roxio products installed on your PC ?
Please answer ALL of the above - if you don't know, say so, don't make something
Well not all DVD Rom's are compatible for DVD Ram. Other problem would be the formatting. Windows XP Home and Professional can only write directly to FAT32-formatted DVD-RAM discs. For UDF-formatted discs, which are considered faster, compatible device drivers or software such as InCD or DLA are required. Windows Vista
can natively access and write to both FAT32 and UDF-formatted DVD-RAM
discs, however Windows Vista uses its own version of the UDF format
giving compatibility problems. Vista also has issues with XP formatted
FAT32 discs as Vista uses the CPRM
features. Even though it is possible to use any file system one likes,
only very few perform well on DVD-RAM. This is because some file
systems frequently over-write data on the disc and the table of
contents is contained at the start of the disc.
You unit is faulty.. replace the unit with a new one. The CD Write Laser has probably "Burnt Out" or perhaps the "Quadrant Detector" has faulted.. either way a new unit is only way solve ya problem ... sry :(
PROBLEM DEFINITION:
Basically, it is a hardware error that occurs when a drive is not capable of following a data track on a CD-R or CDRW or on the other hand, poor power flow may cause the problem
SOLUTION:
1. Try use another disc, a disc with a different band.
2. If one doesn't work, you may have to open your system and use a different power connector, making sure no other devices are using the power connector in the same strand.
3. Lastly, if neither the above doesn't work, you may have to send your drive in for servicing as the head may be dirty or misaligned.
×