pr moi le probleme c est que la machine lave et de temp en temp elle s arrete et je doit l etaindre et l ouvrir a nvs , el il n essore pas ni fais sortir l eau qu elle a pris pr moi le probleme c est que la machine lave et de temp en temp elle s arrete et je doit l etaindre et l ouvrir a nvs , el il n essore pas ni fais sortir l eau qu elle a pris
AnonymousJan 12, 2009
pr moi le probleme c est que la machine lave et de temp en temp elle s arrete et je doit l etaindre et l ouvrir a nvs , el il n essore pas ni fais sortir l eau qu elle a pris pr moi le probleme c est que la machine lave et de temp en temp elle s arrete et je doit l etaindre et l ouvrir a nvs , el il n essore pas ni fais sortir l eau qu elle a pris
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This seems to be a fault with the program controller unit or the water level sensor. The program does not advance further after the inlet is filled but operates the drain to exit water. Now the water level sensor must be checked as if this is not working in the stipulated time it will drain out. Also unless the water level sensor contacts on reaching of set level the motor must start.http://www.espares.co.uk/advice/washing-machines/a/7/1401/how-to-replace-the-bearings-on-a-washing-mach.html
If there is no water in washer, and it will not spin, I suggest you remove the motor, and check the brushes. If they are less than 3 or 4mm long, they need replacing. Hope this helps.
Sounds like the motor although nomally would run longer than 2 years...Did you have new motor fitted or just repair ie brush kit to motor....You could check the bely easy...7 years is very good life span for a machine ,,replacement may be best
ther's something wrong with your water supply to the washer the humming noise is the solenoid on water valve working check water taps to make sure there is water there and hoses are not kinked
Hi ! I have problem with my Bosch Washer wfl 2061 .. It was running till stoped to realease drain water out... But no drain water come out.. I have checked drain water host... Nothing thaere.. Water was still in the drum Tank... Whoever knows this problem , please kindly suggest or help me to do something.. Thanks.. Peace [email protected] , [email protected]
connect at random. put on a rinse cycle. if cold water comes in then pipes are correct. if hot water comes in then pipes are wrong way round and just swap them
possibly the belt is off/broken? can you hear the motor turning when the drum is supposed to be revolving? If not supect the motor carbon brushes, or some other fault with the motor/and /or circiut, at best it may be a burned out wire to the motor
pr moi le probleme c est que la machine lave et de temp en temp elle s arrete et je doit l etaindre et l ouvrir a nvs , el il n essore pas ni fais sortir l eau qu elle a pris
pr moi le probleme c est que la machine lave et de temp en temp elle s arrete et je doit l etaindre et l ouvrir a nvs , el il n essore pas ni fais sortir l eau qu elle a pris
×