How can we get the normal channels on our Philips under the counter TV, 7"?

need to know model you have
Free Philips Universal Remote User Manuals ManualsOnline com

plz read it in your owner's manual available here
http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?qslg=on&mode=search&session=20080712155833_66.249.71.9&ctn=PET835%2F00&ds=PET835%2F00&slg=AEN&searchtext=country+list

and hope u will find what u want

dont hesitate to write, if , your problem doesnt solve..

regards,

• Media player is ultra-slim and mounts under cabinet to save counter space
• LCD TV with 7-inch screen comes with 181-channel cable-ready tuner
• TV screen swivels for variable viewing angels
• Digital tune AM/FM stereo radio with station presets with dual front-firing built-in speakers
• LCD display with blue backlight
• Instant weather band
• Digital clock timer, timer sounds to alarm or radio
• Auxiliary audio/video input jacks
• FM wire antenna
• AC powered, built-in AC line cord
• Battery back-up against power failure, remembers time
• Uses two AAA size batteries for back-up (not included)
• Soft-touch membrane remote control with direct channel select
• Under-counter mounting template

check if your player can read mpeg, avi. divx, etc..

Go into the user menu and reprogram the stations. Make sure that it is set to program digital channels only. Not analog.

It depends on your setup.
Think of the Philips DVD3460 as an independent, standalone television set. It has its own analogue tuner, and its own video input.
If you have an analogue RF TV signal (coaxial cable) going in to the Philips DVD3460, you can watch whatever you want on any other TV connected to the TV signal coaxial cable, since the regular analog TV cable carries all of the channels.
However, if you are using a cable or satellite box and use the "Video in" function of the DVD recorder or just have the DVD recorder tuned to channel 3 or 4 to record from a cable or satellite box, you can't record one channel and watch another unless you have a second cable box..

The Master and slave inverter panels are faulty and yes this may still be under warranty. If the inverter panels (placed at both sides of the LCD panel) have "Rev 1.2" printed down one end, then they need to be replaced with Rev 1.3 panels. This is a common fault and worth contacting the manufacturer about.

open the cover of your tv look for the sound IF using a plastic precesion screw driver adjust the IF counter clock wise slowly untill you reach a good sound or clockwise...if nothong happen solder a 0.2 ceramic capacitor to your sound IF at the coil of the IF under the board the IF has two terminals for the coil.sound if is located near the tuner section..there are two IF the video I.F and sound I.F

I hv philips 21RF vardaan TV ,there is sound on AV channel. and the picture is blinking. even some menu setting have changed.. i tried using the service menu but cudnt understand anything. 2 new av channels have come.. av2 and front which were not present before. sound is not coming even on the other channels but picture is fine on them. only on the av1 channel it is blinking., the philips technision had solved this prob once by pressing some code by remote and i don't know the system code

In short your tv has a problem on the AV connection, RF using coaxial cable is working okay.
get the tv to the w/shop, let him check the AV panel and AV processing IC.

i think in that brand of tv may be some dry- solder . if you can you have to check it after disconnecting the power cord , under the tv
board if some solder is "dry " - for philips , is it normal to happens
if it is you have just solder again  to make electric contact- delfo