I have a mighty mule gate opener that needs a new motor. The number on the motor is FRS-550PH. Can you advise me where it can be purchased

1. Mighty Mule Parts - Gate Opener Parts & Accessories‎

   Adwww.mightymule.com/Accessories‎Cable Gate Lock
2. Driveway Alarms
3. Gate Opener Kits
4. Where to Purchase

Search Results

Mighty Mule Store ' Genuine Mighty Mule replacement parts

www.mightymulestore.com/Mighty-Mule-Gate-Opener...Parts-s/21.htm
Genuine Mighty Mule Replacement Parts. Choose a Product Category. Mighty MuleFM200 Automatic Gate Openers · Mighty Mule FM350 and FM352 Gate ...‎Mighty Mule 500 Parts - ‎FM350 or FM352 - ‎MM600

Mighty Mule 500 Parts ' Shop Accessories and parts for the ...

Lubriplate Low-temp Multi-purpose, Low Temperature Grease, the same grease used for Genie garage door openers. When i used other types of grease, the opener would squeal when the temperature was low.

Its kinda hard but if you follow the info in the owners manual for your truck it works. It is not rolling code like a gargae door this is a dip switch on or off .

Try Mouser.com part # P6KE16CA 36 cents a piece.

You can buy a 550 motor for about 5 -10 $$ remove the pinion gear from the old one and put it on th new one
http://www.trossenrobotics.com/store/p/5152-RS2-550-Motor-12V.aspx?feed=Froogle

Did you ever find a motor to fix the gate opener? I am looking for the same motor and would appreciate any help you can offer

Hello, im sorry to hear that you are having trouble with your gate opener. but it depends, on if your opener is still under warrenty and how the board got damaged, GTO "which is the manufacturer of mighty mule" is very picky about returning goods, so you MIGHT be able to get it replaced, but just getting it repaired is out of the question because of the components being heat sensitive and having software in the board, if you have more questions please email me a [email protected] 

I will need to know a model number, im guessing a Mighty Mule 700, Gto Pro 1000, or Mighty Mule 500

Check the STALL FORCE setting on BOTH openers, check for gate obstructions broken gate hardware. OR your limit settings have been erased, but if none are the problem that you have a broken REV COUNTER which is inside the arm

Well this is a BAD situation, because your opener was NOT grounded, you will have to replace the Circuit board, but since this damage was caused by an act of god "nature, being lightning struck" Than GTO, "mighty mule" will probably NOT replace the board leaving you to BUY new ones, which are about $100 to $200