1) With the printer powered off but connected to a power source,
press the Power button while pressing and holding the Stop/ Reset
button.
2) When the Power is lit, press the Stop/Reset button two times while
pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button
(regardless of order), the printer will move into a service mode.
(Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the
specified number of time(s) according to the function listed in the
table below.(Each time the Stop/Reset button is pressed, the LED lights
alternately in orange and green, starting with orange.)note: press 4
times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)
Error Code Message for Printer Canon MP145 and Canon MP160:
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink
cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera
Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
SOURCE: my pixma mp 145 was error
Normal
0
Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off.
I'd do both and reinstall the CD software program that came with
the printer. When the software program asks you to connect the
printer to the USB port, do so and it should again work properly.
Hope this helps. Bud
SOURCE: I lost CD software for
A bigger question might be will the operating system you are using support the printer? You could check the Windows 7 hardware compatibility list (other versions of windows can be accessed from that site as well) See if the MP 145 is listed. There will be additional info posted there as well.
OR ... you can go to www.canon.com/support and get your drivers for the OS you are using.
SOURCE: I want to know how to download printer canon mp 145 freely
hi, search in this web site www.4shared.com
or search in google as "free download canon mp 145 printer"
857 views
Usually answered in minutes!
×