1. Remove the paper cassette and the paper transfer unit. (Draw the paper transfer unit while pressing the buttons in) CAUTIONS When if installing or removing the developer, do not let the magnet roller touch any part in the printer. A. Open the top cover. C. Remove the toner container. D. Disconnect the developer connector. E. Remove the developer from the printer while sliding the developer lock lever frontwards. F. Gently flip down the magnet roller protective cover. NOTE After removing the developer, seal it in the protective bag and place it on a flat surface. Do not place the developer in a dusty area. 4. Remove the drum unit while pressing the drum lock. I hope this is helpful, Shawn
2. Remove the developer unit.
3. Remove the waste toner bottle.
856 views
Usually answered in minutes!
×