Loaded software for kodak easyshare v803 cam but when camera is connected,computer doesnt recognise it

Hi!

Please check the "Troubleshooting" part of the manual to this camera.
https://manualsbrain.com/en/manuals/1041829/?page=54

if it's not reading old or new you might have to format the memory card on your computer first... all you do is put the memory card in the computer and you go to my computer and look for the drive... if the drive is not there then you will have to go to kodak and look up there driver readers and download it then it should work... also sometimes a camera can only take certain gb so you might have to down size... i hope this helps you out

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. And if you have to buy a card reader, it's not going to cost you any more than a new cable.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.

Try downloading a compatible software for C330.

Use a card reader instead of your camera.

Yes its possible to replaced. So dont worry and visit kodak camera service center. Thanks.

With the cam connected , open the easyshare software ,bypass the transfer window then click on the ADD PICTURES icon on the top left,under SELECT A LOCATION click on the model no. of the cam. Tag all the pictures you would like to add, then click on ADD PICTURES. Click on DONE once finished.

you should call KODAK Technical Support thru this number 1800 235 6325 op 12 op 2

Turn on the cam first before connecting, make sure that the LCD of your cam turns of when connected to pc also double check the usb connection from end to end

Easyshare software is available for a free download at

www.kodak.com