I put my memory card into my Kodak EasyShare C143 digital camera. I press the review button, but all that comes up is that the file is 'Unrecognised'. One out of the three pictures is unprotected, but the other two are protected. When I try to delete the unprotected picture, it doesn't work. When I try to 'Unprotect' the protected pictures, it doesn't work either. Please help and I am grateful for any suggestions. :) Thanks.

You can copy pictures/videos from a card to internal memory or from internal memory to a card.
Copy pictures/videos:
1 Press the Review button, then to find a picture. (You can also use multi-select. See Selecting multiple pictures/videos.)
2 Press the Menu button, then to choose the Edit tab.
3 Press to choose Copy, then press OK.
Make a choice, then press OK
as pag 29 on the manual says.

You may download Kodak software from here.

Bear in mind that you don't need a driver. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Check your card isn't set to write protect then try re-formatting again in the camera, if it still doesn't work, try another card. The card you're using could be faulty.

To delete individual pictures, press the delete button while viewing the picture. The delete button is the top button on the "button bar", marked with a trash can.
http://resources.kodak.com/support/shtml/en/manuals/urg01132/urg01132c4s2.shtml

To delete all pictures, format the internal memory and/or memory card. Memory cards should be formatted each time you finish downloading your pictures to your computer.
http://resources.kodak.com/support/shtml/en/manuals/urg01132/urg01132c5s2.shtml

All your pictures and data are saved on the memory card of your digital camera automatically.So you can recover pictures from memory card with data recovery software.I have a professional program on my computer that can recover data after deeply scanning your memory card to look for lost data. But you had better have stopped using the memory card of your camera. Because, once the pictures were overwritten by new ones,they are gone for good.By the way,you can download it and scan your memory card for free to preview whether your lost pictures can be recovered.Get it from http://www.any-data-recovery.com/product/datarecoverystandard.htm

Your camera is talking about its internal memory. If you want the card to start working, you must get rid of the pics on the internal memory. With no card in the camera, go into the menu and find "format" and follow the on-screen instructions.

Insert a memory card. Set the camera's image storage location to internal memory. Press the Review button, then press the Menu button. Use up/down to highlight "Copy" then press OK. Select an option and press OK.

To set the camera's image storage location, press the Menu button then use up/down to select "Image Storage." Don't forget to change it back when done.

Hi

I am not sure the Kodak EasyShare C813 can transfer files straight from the internal memory. Many cameras need you to copy the images on the internal memory to a memory card and then you can transfer them over.

On the Kodak you can copy (not move) them to a memory card by following the instructions below:

Copy pictures/videos:

1 Press the Review button, then the Menu button.

2 Press ^ v to highlight Copy, then press OK.

3 Press ^ v to highlight an option.

4 Press OK.

Hope that helps

David

Insert a memory card. Press the Review button then press the Menu button. Use up/down to highlight "Copy To" then press OK. Use up/down to highlight the destination then press OK. Use up/down to highlight and option then press OK.

This procedure copies files. You'll want to delete them from internal memory once you're sure you've got them printed.

Press the Review button, then the Menu button. Use cursor-left-right to select the Review tab. Use cursor-up/down to select "Copy" and press OK.