ASUS M2N-E SLi Motherboard Logo

Related Topics:

Posted on Dec 27, 2010

I have a gxl2200 microphone that ive plugged into the front of my vista, the problem is the mic is not being detected by my laptop. I already have the updated version for audio. So im not sure what else to do.

3 Related Answers

Anonymous

  • 97 Answers
  • Posted on Sep 17, 2008

SOURCE: Microphone(MIC)Of head set not working(got removed wrongly)

This usually just gets reinstalled whenever you restart your computer be it Vista or XP. In your case, the drivers for the Microphone probably got deleted. The Microphone driver comes in the package together with the sound card. You'll have to re-install the whole sound card driver to have it start working again. You can do this from the Device Manager. After doing this, the microphone together with the whole sound card drivers should start working again.

Ad
steve6375

Steve Si

  • 395 Answers
  • Posted on Nov 16, 2008

SOURCE: ''CMOS Settings Wrong! USB DEVICE OVER CURRENT STATUS DETECTED

Have you checked all USB port sockets to see if any of them are broken? I mean inside the socket itself. It is easy to break the small plastic black tongue in these (e.g. by bending down on a USB memory stick. Then when you put another USB plug into it, the 4 contacts can get bent and the +5V will short out with the case.
Check all USB sockets.

Anonymous

  • 1 Answer
  • Posted on Dec 16, 2010

SOURCE: My Motherboard ASUS p7h55-M got

go to bios setup-> advance tab -> chipset -
. in one of the panel you will find audio device properties. there in front panel option change option from high definition audio to ac 97. i have asus p5kpl am-ps motherboard and had the same problem i found the solution by googling

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I connect my CAD GXL2200 mic to my apple laptop?

You need a USB interface such as an M-Audio M-Track and a standard XLR male to female audio cable.

You use the cable to connect the microphone to the interface using the XLR cable, then you plug the USB cable on the interface to a USB port on your laptop. Finally, you go to System Preferences - Sound - Input and select the USB interface as the input source.

Depending on the software you you use for recording sound (I use Sound Studio from Felt Tip Software) you may need to go into the Preferences for the program and select the USB interface.
0helpful
2answers

I just bought the GXL2200 CAD microphone without the cabels,(thought they would've came with), what kind of cable do i need?

As with most microphones, these mics use XLR cables. You can get them online or in a music store in many different lengths. What you need is XLR male to XLR female, though most of the consumer-level stores will probably just call them "mic cables." Note that the thing you're plugging into will need to have an XLR input, and will need to provide phantom power in order for that mic to work.
0helpful
1answer

Lexicon alpha and gxl2200 microphone

Are you trying to use the mic input on the back or plugging it into the instrument input on the front? If you use a low impedance mic with a quarter inch instrument input cord, you would need a transformer adapter to make the mic work on high impedance. Even if you put it on line in, you would still have to convert it. Only the XLR socket on the back will work on a low impedance mic.
0helpful
2answers

How to work EMU 0204 with CAD GXL2200

Turn on phantom power for mic? Try a different cable.
0helpful
1answer

How do I get my gxl2200 mic to work?

i plugged my GXL2200 in and when i record no sound is picking up
1helpful
2answers

On the CAD GXL2200SP Where is the the power switch for the mic located at? Im not getting anything i have the phantom power and everything plugged up right. But i knw there has to be a power switch...

I don't believe the GXL2200 has a power switch directly on the microphone itself. Would you be able to tell me how you are supplying phantom power to the microphone?
1helpful
1answer

Can I connect a CAD GXL2200SP Condenser Mic to a computer?

Technically, you can plug any microphone into a computer via an audio interface or USB(if applicable) With this mic it will require an audio interface just remember that since you are using a condenser you will need an interface that can supply phantom power. Good Luck, Cody J.
0helpful
2answers

I have a gxl 2200 mic and my computer acknowledges the mic but i cant record anything because when i play it back there is no sound

You'll need a phantom power source, like an interface or mixer. Otherwise, the mic is likely in need of repair.
1helpful
2answers

I bought a GXL220

You need a 48volt phantom power supply and 2 balanced XLR microphone cables.
Not finding what you are looking for?

84 views

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...