At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Don't know of a 59.CK error. However a 59.C is a "developing disengaging motor" error. If you are a tech, replace the developing disengaging drive assembly(RG5-6719-000CN).
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
HP Support Communityhttps://h30434.www3.hp.com > td-p
Jan 5, 2022 - 59 error could be a bad motor or Developer motor rotation error. Remove all toner, power cycle the printer, and re-install one at a time, closing the access ...
The error code means the vacuum fan is not detected.
Replace the vacuum fan. If that does not fix the problem, replace the Main Logic board. The fan can be ordered from: Designjet 5000 5500 Vacuum Fan and the PCA from: HP Designjet 5000 5500 parts
If you mean toner, you can probably do it, but most new printers have a memory chip on the cartridge which keeps track of toner. Adding toner will not change the count and the printer will ignore the new toner
All the book says is that one of the motors had a problem. Power it off for at least 30 seconds. Power back on. Make sure you are not using a surge protector. Put the power cord directly into the wall outlet.
I just checked the manual for another printer and the 59.f0 could be the ITB. Make sure that it is seated correctly. If you have a spare install it and see if problem goes away.
no. i think the pressure roller of your printer was to soft already normal call for that item is lower roller and heck the sensor of the fusser assembly
You probally need to contact an engineer on this one, from HP trouble shooting manual
Description A printer motor error has occurred. This message might also appear if the ETB is missing or incorrectly installed. Ensure that the ETB is installed correctly. Action 1.Press the green <Tick Symbol>(Select) button to continue. 2.Turn the printer off, and then turn the printer on. 3.If the error message returns, turn the printer off. 4.Perform a cold reset. a.Turn the printer on. b.Watch the control panel. c.When the memory starts counting, press and hold the green <Tick Symbol> (Select) button. d.Continue holding the green <Tick Symbol> (Select) button until the Ready, Data, and Attention lights flash once, and then stay on steady. e.Release the check button when the Ready, Data, and Attention light are on steady. The control panel will display SELECT LANGUAGE. f.Press (Down Arrow) button once. The control panel will display COLD RESET. g.Press <Tick Symbol> (Select). The printer will perform a cold reset and then continue its power-on sequence. 5.If this message persists, contact an HP-authorized service or support provider.
×