When I use the front right burner on high, it keeps clicking on and off. Both the small and large burner does the same thing.

Hello,

The switch for the right front burner is defective and needs to be replaced,its bad as far as internally when turned on no matter what its set it the interal contact is stuck on only high so their is no setting it will work on except high. By replacing the switch it will work on the various settings and not just high.


GENE

Hi, Sorry I missed this as it got buried in my emails. The part number for the switch you need is WB23M0009 costing about $70.00

Sorry to read about your problem, I hope this helps you out.

you have a defective control board

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck
ewrwer
werwer

you need to check the wiring to that burner it appears that there has been a short to the burner

You need the switch for that burner. The contacts inside are stuck together. You will need to pull the unit and separate the glass from the lower body to access it. To get the right switch you need full model and serial number located on a plate at the bottom of the unit.

Your ability to perform this is dependent on how mechanical you are. The Whole unit must be removed from the counter opening and the base unscrewed from the glass, remove knobs before disassembling. For someone mechanical this is not difficult. De-energize whole unit first.

Once the two pieces are separated the remainder is mechanically easier. Disassemble the box on right containing the switches and replace the correct one. Reverse the process for reassembly. Good Luck

hi gud day,i think the sensor is we have problem is hard to repair in ur own,try to call the person have expireince for repair that unit, or ur igniter ligther have damage like small broken if u hear have click is ok but much better to check the igniter coz the broken igniter is not directly spark in the burner that why is not light.to check if remove the burner base cover then see if the igniter like a small niddle color white,turn the knob to click the igniter then see it wer the spark directly if u not see it means have a broken igniter.

tns gerbee

There are a series of holes in the burner leading down from the main flame area to the pilot tube, ensure the holes are not plugged/restricted.

This is for the glass top units. well i'm not sure if your problem is with your large or small single burner or the large expandable burner. If it's the large or small single burner replace the burner and if it the expandable also replace the burner. If you have a coil burner replace the infinite switch. Good luck hope this helps you.

It's an ignition switch. don't change the burner cartridge.

I have had this same problem on the JP350.

I have replaced the switch several times, and am now tempted to replace the heating element and the switch the next time it becomes constant (currently, it is intermittent... which has led to some burnt food).