Where to purchase Ryobi dust bag for model RESV-1200A

Try Ryobi tools or your supplier.

If all the obvious shows nothing wrong, wiring, connections, etc ok, use a multimeter to see if power is getting to motor. If so then most likely one of the windings is broken.

The pathway that the dust follows to reach the bag is most likely clogged. Take the bag off and look inside to see if there's sawdust plugging the orifice. If there is then you could vacuum out the dust or simply start up the sander and let the machine clear itself. If you do the latter just know that you will create a cloud of dust so do it in the proper environment.

Hello, this is Ava with Think Crucial.

You may view the online manual for your Bissell model on how you can replace dust bag by clicking the link below.

Bissell ZING 22Q3 SERIES User Manual Dust Bag Replacement

You can purchase a wide variety of high quality Bissell replacement parts for your Bissell vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

https://www.thinkcrucial.com/collections/vendors?q=Bissell

I hope this was helpful.

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

Hi,

The part number for just the bag is actually PN: 3410071 or ACC019
http://www.ryobi.com.au/Products/Accessories/LawnGarden/Dustbags/ACC019.aspx

Try these folks
http://www.fastflex.co.za/index.php?page=contact

and here also:
http://www.northlawnmowers.co.za/contact-north-lawnmowers-gauteng.html

This will probably be your best chance of getting the part you need:
http://www.ryobi.co.za/
Contact us today:
Email: [email protected]
Tel: +27 (11) 357-9600 // Fax: +27 (11) 805-5541
Physical Address: 604, 16th Street,
Randjespark, Midrand, South Africa

I do wish you the best, Thanks for choosing FixYa,
Kelly

In Australia Bunnings are the dealer for Ryobi products.

I have the same one and also need a bag for mine.

You have to order the bag from the "special orders" section as it is a discontinued item at Bunnings.

Unfortunately they told me yesterday (15/1/11) that Ryobi have no stock and it will be May before they arrive from Japan.

The Ryobi part number is 4072241 and Bunnings quoted me $15.20.

Hope that helps.

I'm going to take mine in with me to Bunnings today to see if I can modify a bag from another model to fit. Maybe if you don't want to wait until May you could also try that?

Good luck,
Eric Oppel

I do not have info on a local vendor for you, however, I do have good news. Your Ryobi is actually made by MTD. The part number for your impeller is 791-182550 and is available at many places online including www.ereplacementparts.com www.searspartsdirect.com and www.partstree.com .

I would encourage you to find your local small engine repair shop and see if they can order the part for you. They may have a regional source for the part and can save you the international shipping.

Good luck!

Hi vikkibarr...
I am buying the same bag's from here RYOBI Vacuum Bag Assembly Oval Inlet by Guaranteed Fit Parts to replace...
I hope this was helpful.
enjoy

try www.jackssmallengines.com they have great prices and a wide selection of parts