Can any one help with the error code E6 on an oce 940 plan folder

Recommend updating the driver. Opening and closing the lid may temporarily alleviate the problem. Alternatively, contact a Cannon/OCE service representative who has access to the codes. The user manual does not address these specific codes.

I got this free Pdf manual from an online store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the all the times I fixed the chipper in these 4 years

Oce (Canon) makes 3 different types of "500" plan printers. The ColorWave 500, the PlotWave 500 and the old TCS 500. If you mention the proper model number you might get a faster answer. If you have the TCS500 this is a head calibration error. Was a printhead recently replaced? If so it is more that likely that either the plastic seal was not completely removed from the new printhead, or there may be some ink on the contacts on the inside of the printhead socket. Reinsert the printhead in question, and see if this solves the error. Power down the printer and unplug it from the wall. Clean the inside of the printhead socket with a long swab and some isopropyl alcohol. Plug in and power on the printer after replacing all printheads. On extremely rare occasions brand new printhead do fail, so if you have determined you might have a faulty printhead, replace it with another.

Oce (Canon) makes 3 different types of "500" plan printers. The ColorWave 500, the PlotWave 500 and the old TCS 500. If you mention the proper model number you might get a faster answer. If you have the TCS500 this is a head calibration error. Was a printhead recently replaced? If so it is more that likely that either the plastic seal was not completely removed from the new printhead, or there may be some ink on the contacts on the inside of the printhead socket. Reinsert the printhead in question, and see if this solves the error. Power down the printer and unplug it from the wall. Clean the inside of the printhead socket with a long swab and some isopropyl alcohol. Plug in and power on the printer after replacing all printheads. On extremely rare occasions brand new printhead do fail, so if you have determined you might have a faulty printhead, replace it with another.

OCE clear error message replace toner oce fx 2081 ... - Fixya

www.fixya.com/tags/clear_error_message_replace...oce_fx_2081/.../oce

Ask your Clear error message replace toner OCE fx 2081 questions. ... ...error code0501 message, though we've vacuumed it the toner as best as possible. ... ...error 2201 switch on/off messages very frequently on my oce 9400 machine, any solution!!! thanks Might be NTC6, which is located in ... 05 is appearing on the.

clear error message replace toner oce fx 2081 Questions ...

www.fixya.com > Forum > Tags

Find solutions to your clear error message replace toner oce fx 2081 question. ... ...error code 0501 message, though we've vacuumed it the toner as best as possible. Well ... ...error 2201 switch on/off messages very frequently on my oce 9400 ...

Sharp ARM 550/620/700 Reset Machine with Error Code ...

This machine has a battery. When the machine keeps turned off and no conectec with the eletricity, the baterry cant charge and the machine lost de parameters.
The solution is reinstall the machine.
I have one machine stopped with this problem, but I cant find the instalationmanual to solve the problem. If somebody has...

You have to check a sensor that hold a big cover, under the feed table. I just closed that cover tightly

what is oce 9400 error code 0813 ?
plase help me??
[email protected]