We are using zebra barcode printer TLP 2844 model now a days this printer isnot connected to the port,if printer connect to the port we are not getting print label kindly send how we do solve this problem and send printer driver also

So you have Zebra LP2844 or TLP 2844?
try diferent driver and print test page
www.seagullscientific.com

check the connection configuration (if is com port, check speed, flow control and others)
Try to install locally with segull drivers (www.seagullscientific.com) if you need, reset to factory defult. print a test label from the driver. if is comunicate, is not printer problem, is connection problem with your software.

You need to use a printer driver or use ZPL commands to print.

Contact Labeltronix at 800.429.4321. One of our sales reps can help you with your label/ribbon combination for your application. www.labeltronix.com

Download a free "Arabic" true type font. Use Zebra Designer to print your label and use the arabic font to print any character.

Two possibilities are the port configuration and the type of serial cable.

The printer has a feature that will try to match itself to the PC's configuration. Press and hold the feed button until the green status led flashes three times. While the led flashes send a ZPL format to the printer (hopefully you can do this through Design Pro by trying to adjust the printer or print labels, but the labels will not print). When the printer and PC are synchonized, the led changes to solid green.

If you can synchonize but still can't print, the problem might be the serial cable; not all serial cables will work. You should use a full null model cable (all pins connected except 1 and 8).

plz try to use in another port(if available) or try with another cable

Go to Control Panel, Administrative Tools (in Clasic view), and double click on Services. Scroll down and right-click on "Print Spooler". Start (or Restart) it and your printers will reappear in the "Printers and Faxes" window, and the spooler will try to send jobs to the printers again.

If you check the Properties of the Print Spooler, on the Recovery tab, you can set it to "Restart the Service". I set mine to Restart on the First Failure and Second Failure, and Take No Action on the Third Failure, in case something really needs attention.

recalibrate the label length in the printer(hold feed and power up). from memory bar-one uses the label settings from windows, so go into printers and faxes under control panel and correct the label size