Cannot get dial tone on KX-T7730. Intercom feature works fine.

How to set date & time for panasonic KX-T7730 Propietary Telephon for more information visit us www.panasonic.jayaperkasa.com/date-time-panasonic-kx-tes824/

When you put a call on hold you should get intercom tone. At that point you just dial the 3 digit extension you want to speak to. That ext should ring or have a voice page. Make sure the auto answer button is lit on the phones to do voice page

When the system is installed, you need to make sure that only the lines equipped are in the access plan (program 400 in a TA series box). When you go to the intercom on a phone and dial "9" you should get an outside line every time. If that works, system and personal speed dials include that access code as part of the number. eg my test number is 914197845522 9+1+10 digits.

Carl

Here are two methods to turn off background music, one of these should work depending on which Panasonic phone system your phone is connected to.

1) With phone idle, press the 1 key on the dial pad (turns off background music when it is on and turns on background music when it is off).


2) With phone idle, press intercom button then dial *751 on the dial pad followed by 0 on the dial pad to turn off background music(confirmation tone will be heard) and end by lifting handset and replacing in cradle. To turn background music on, press intercom button then dial *751 on the dial pad followed by 1 or 2 on the dial pad to select the background music source(confirmation tone will be heard) and end by lifting handset and replacing in cradle.

Down the right side of the phone you have 12 Personal Feature buttons. Also, from the intercom, dial "9" and see if you get an outside line. If you don't, you need to fix that in system programming.
Now, from your phone, press PROGRAM, one of the 12 right side buttons, and dial "9" plus the number you want and STORE. You can continue programming all 12 buttons and when you're done, pick up the handset and drop it back down to exit programming.

You dial them by pressing speakerphone or picking up the handset and pressing the button.

Carl

try pushing the intercom button again

The mechanics of storing a speed dial number on Panasonic phones is the same, even if the phone can be connected to one of 18 different model Key Service Units. It involves pressing PROGRAM a button, an access code, the number, and STORE. In the U.S. our access code to get an outside line is "9". You may be using something different, like '0'.

The differences are if you can dial "9" on the intercom and get a dial tone, which collumn of buttons you press, and/or whether you want this to be PERSONAL numbers or SYSTEM numbers.

In a TA-824, lines are accessed high to low. If you have 2 lines on a basic system and dial "9" to get an outside line, you will land on line 3 if you have not told the system that line 3 is disabled (system program 400). So, the fast answer is press PROGRAM, a button on the right side, dial 9+your desired number and STORE. If it's a left side button, dial 29 instead of 9.

System speed dials requrie access to system program 001.

If this does not work on your system, please comment back with your actual system model number.

Carl
.
,

Wow, this is your lucky day :-)

From each phone, press PROGRAM 99 and the INTERCOM or CO buttons TWICE, then dial 1-8 and STORE. (default is 2). You can now make each line and intercom different, or each phone (up to 8) different. After you finish with each phone, just pick up and drop the handset back into the cradle to end programming.

The feature is called Ringing Tone Selection.

Carl

The KX-T7730 is a proprietary phone that needs to be connected to a Panasonic phone system. It sounds like you took the phone home and are trying to use the special features. These phones are "dumb terminals" everything is performed (and stored) at the control unit.