Ovens Logo

Related Topics:

Posted on Jul 03, 2008

Whirlpool self cleaning oven, Super capacity 465, door will not close

Lock on oven door is not in proper position to operate oven, will not start oven temperature procedure

  • 8 more comments 
  • Anonymous Oct 09, 2008

    I have the same problem. I get an error FSE 1 when I try to initiate the self cleaning. The door never locks.

  • chaoswmn Oct 12, 2008

    I tried to turn on the self cleaning and got an f code. The door never locked, I have a 465 model RF314PXG

  • Anonymous Nov 26, 2008

    How can I fix this problem? I get the same F code.

  • blight Nov 30, 2008

    Hi i have a whirlpool6akp 691 and the door does not close, its annoying as the heat disappears any solutions thanks.

  • Hank Palacio Dec 21, 2008

    Oven will not clean. I set it but it does not start. Push self clean and start and after a few min. I get a EL-F5 on the screen/

  • Anonymous Mar 15, 2009

    I had F5 I need help ? and the door did not open

  • Anonymous Mar 19, 2014

    Door will not come off

  • Anonymous Mar 22, 2014

    How do I remove the oven door from my KIC Super Chef oven in order to clean the oven properly

  • Anonymous Mar 22, 2014

    How do you take the oven door off a KIC Super Chef oven in order to get in and really clean it

  • Anonymous Mar 26, 2014

    Oven door is on lock and can't get
    It off lock whirlpool super capacity 465

×

1 Answer

cowbyup1

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Dec 02, 2008
cowbyup1
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Dec 02, 2008
Answers
1
Questions
0
Helped
1923
Points
6

I had the same FSE error which the whirpool web site advises that you will need to schedule a service appt to fix. Instead I leaded against the door while initiating the cleaning cycle and the door locks and oven cleans fine.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

I have a Whirlpool Super Capacity 465 self-cleaning oven. I tried to use the Auto Clean function tonight, but after about 15 secs., the oven displayed error code FSE1, beeped multiple times, and then...

I researched your question regarding error code FSE1. I could not find a response regarding a self cleaning oven. If you will provide the model number on the below listed website under "cooking" you may get a detailed response.
http://producthelp.whirlpool.com

It seems that a general "fix" for error codes is to got to your electrical panel and shut off the breaker controlling your device for 1 minute. This resets the device and will reset the error code. (May not fix your issue but will reset code.)

Your manual should have a list of error codes to help you resolve this issue. If you have misplaced the manual, you can also download one for your device from Whirlpool's website as well.

If all else fails here are the U.S. and Canadian telephone numbers under "Contact us". I do not know if this is a pay line or Whirlpool will answer your questions and attempt to resolve at no cost.

US: 1-866-698-2538
Canada: 1-800-807-6777
Jan 02, 2018 • Ovens
0helpful
1answer

I have a whirlpool Super Capacity 465 self cleaning oven with accubake. About a month ago after using the oven to bake dinner the keypad button(s) became stuck (i figured this out after researching the...

Hello Michelle!
Crazy to hear, but this is actually a touchpad failure.
Luckily, we at FixYourboard.com have a solution.
Read more about the cause and fix in our blog! F5 E1 Error Code Whirlpool Built In Double Wall Oven

Feel free to contact us if you have any questions. [email protected]
0helpful
1answer

Whirlpool self cleaning oven problem

Hi


Thanks for using FixYa. This error means that you’ll need to check the door latch/switch and replace the part that has gone bad. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee
0helpful
1answer

The oven door won't open, and there is still food in it. We have a Whirlpool Super Capacity 465 Model, amd need assistance immediately.

Hello. It is possible that the oven accidentally got turned to the self-clean function. Check to see. If it is set to self-clean, the door lock activated. In order to unlock the oven has to be taken off of self-clean and then it has to cool down to room temperature before it will unlock. Joe
Apr 04, 2010 • Ovens
2helpful
1answer

Lock symbol on oven won't go away

Unplug for 60 seconds and plug back in
Apr 30, 2009 • Ovens
1helpful
2answers

Self clean

Usually the oven has to be locked closed with a handle on on the front door. This will activate a safety mechanism that will allow the cleaning cycle to start. If the safety switch is malfunctioning or the door is not closed properly, the cleaning cycle won't start.
Apr 20, 2008 • Ovens
0helpful
1answer

Whirpool Super Capacity 465 Self-Cleaning Gas Range error code F5

facing the front of the oven (while off) put your hand along the back of the oven toward the top left side. there should be a techinical spec sheet with a list of what the codes mean and possable solutions.
8helpful
4answers

ER1 F2 error on Whirlpool Super Capacity 465 RF386PXE Oven

HOW DO YOU CLEAN SELF CLEANING OVEN SUPER CAPICITY 465
Sep 23, 2007 • Ovens
Not finding what you are looking for?

1,933 views

Ask a Question

Usually answered in minutes!

Top Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...