How do I do a password for the machine Xerox CopyCentre C128

http://www.support.xerox.com/support/copycentre-c123-c128/support/enus.html

This is how to turn off Auditron but this is the same menu as "foreign interface device" or copy card.

U HAVE TO CHANGE THE DRUM CARTRIDGE OR IF UR A SERVICE REP U CAN ALSO CHANGE THE CHIP TO MAKE IT WORK

The fuser is not warming up properly. Could have paper wrapped around it, but most likely the over heat popped. You will most likely need to replace the fuser.

That is a finisher stack height sensor fault. It has not reset when the tray started to lower.
Most commonly that sensor has an arm on it, it will often times fall off. Look around the finisher, on the floor and under the machine for a black part, maybe 2 inches long. Skinny. It is an odd shapped part. It would be sticking out onto the tray, in the middle. It may just be stuck. but my bet is that it has fallen off.

You can always find your answers at www.xerox.com./support
Two solutions to try: Related Fault Codes: 047-212, 047-211 Related Fault Codes: 071-210, 072-210, 073-210, 074-210

1. Power the Machine OFF and ON
2. Check For Paper Behind the Paper Tray

Links to solutions: http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=447,E=0000000002703236606,K=6528,Sxi=8,Case=obj(1908)
http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=447,E=0000000002703236606,K=6528,Sxi=8,Case=obj(2119)
Hope it helps!

A PC with the same IP address exists on the network.
Procedure Inform the customer that the IP address of the machine is the same as the IP address of another machine on the network.

Download the user manual from Xerox's website.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

x-admin

exactly what do you want to change?
No need to reset everything. You can change it item by item easier.

The default password for the C128 is 11111. If this has been changed and you lost it, a Xerox Technician must come out access diagnostics to reset the value to default.